Results 1 - 10
of
296
XORs in the air: practical wireless network coding
- In Proc. ACM SIGCOMM
, 2006
"... This paper proposes COPE, a new architecture for wireless mesh networks. In addition to forwarding packets, routers mix (i.e., code) packets from different sources to increase the information content of each transmission. We show that intelligently mixing packets increases network throughput. Our de ..."
Abstract
-
Cited by 548 (20 self)
- Add to MetaCart
(Show Context)
This paper proposes COPE, a new architecture for wireless mesh networks. In addition to forwarding packets, routers mix (i.e., code) packets from different sources to increase the information content of each transmission. We show that intelligently mixing packets increases network throughput. Our design is rooted in the theory of network coding. Prior work on network coding is mainly theoretical and focuses on multicast traffic. This paper aims to bridge theory with practice; it addresses the common case of unicast traffic, dynamic and potentially bursty flows, and practical issues facing the integration of network coding in the current network stack. We evaluate our design on a 20-node wireless network, and discuss the results of the first testbed deployment of wireless network coding. The results show that COPE largely increases network throughput. The gains vary from a few percent to several folds depending on the traffic pattern, congestion level, and transport protocol.
Embracing wireless interference: Analog network coding
- in ACM SIGCOMM
, 2007
"... Traditionally, interference is considered harmful. Wireless networks strive to avoid scheduling multiple transmissions at the same time in order to prevent interference. This paper adopts the opposite approach; it encourages strategically picked senders to interfere. Instead of forwarding packets, r ..."
Abstract
-
Cited by 358 (10 self)
- Add to MetaCart
(Show Context)
Traditionally, interference is considered harmful. Wireless networks strive to avoid scheduling multiple transmissions at the same time in order to prevent interference. This paper adopts the opposite approach; it encourages strategically picked senders to interfere. Instead of forwarding packets, routers forward the interfering signals. The destination leverages network-level information to cancel the interference and recover the signal destined to it. The result is analog network coding because it mixes signals not bits. So, what if wireless routers forward signals instead of packets? Theoretically, such an approach doubles the capacity of the canonical relay network. Surprisingly, it is also practical. We implement our design using software radios and show that it achieves significantly higher throughput than both traditional wireless routing and prior work on wireless network coding. 1.
Opportunity-based topology control in wireless sensor networks
- in ICDCS
, 2008
"... Topology control is an effective method to improve the energy efficiency of wireless sensor networks (WSNs). Traditional approaches are based on the assumption that a pair of nodes is either “connected ” or “disconnected”. These approaches are called connectivity-based topology control. In real envi ..."
Abstract
-
Cited by 139 (21 self)
- Add to MetaCart
(Show Context)
Topology control is an effective method to improve the energy efficiency of wireless sensor networks (WSNs). Traditional approaches are based on the assumption that a pair of nodes is either “connected ” or “disconnected”. These approaches are called connectivity-based topology control. In real environments however, there are many intermittently connected wireless links called lossy links. Taking a succeeded lossy link as an advantage, we are able to construct more energy-efficient topologies. Towards this end, we propose a novel opportunity-based topology control. We show that opportunity-based topology control is a problem of NPhard. To address this problem in a practical way, we design a fully distributed algorithm called CONREAP based on reliability theory. We prove that CONREAP has a guaranteed performance. The worst running time is O(|E|) where E is the link set of the original topology, and the space requirement for individual nodes is O(d) where d is the node degree. To evaluate the performance of CONREAP, we design and implement a prototype system consisting of 50 Berkeley Mica2 motes. We also conducted comprehensive simulations. Experimental results show that compared with the connectivity-based topology control algorithms, CONREAP can improve the energy efficiency of a network up to 6 times. 1
Achieving Single Channel, Full Duplex Wireless Communication
"... Co-primary authors This paper discusses the design of a single channel full-duplex wireless transceiver. The design uses a combination of RF and baseband techniques to achieve full-duplexing with minimal effect on link reliability. Experiments on real nodes show the fullduplex prototype achieves med ..."
Abstract
-
Cited by 134 (9 self)
- Add to MetaCart
Co-primary authors This paper discusses the design of a single channel full-duplex wireless transceiver. The design uses a combination of RF and baseband techniques to achieve full-duplexing with minimal effect on link reliability. Experiments on real nodes show the fullduplex prototype achieves median performance that is within 8% of an ideal full-duplexing system. This paper presents Antenna Cancellation, a novel technique for self-interference cancellation. In conjunction with existing RF interference cancellation and digital baseband interference cancellation, antenna cancellation achieves the amount of self-interference cancellation required for full-duplex operation. The paper also discusses potential MAC and network gains with full-duplexing. It suggests ways in which a full-duplex system can solve some important problems with existing wireless systems including hidden terminals, loss of throughput due to congestion, and large end-to-end delays.
Symbol-level Network Coding for Wireless Mesh Networks
"... This paper describes MIXIT, a system that improves the throughput of wireless mesh networks. MIXIT exploits a basic property of mesh networks: even when no node receives a packet correctly, any given bit is likely to be received by some node correctly. Instead of insisting on forwarding only correct ..."
Abstract
-
Cited by 82 (2 self)
- Add to MetaCart
This paper describes MIXIT, a system that improves the throughput of wireless mesh networks. MIXIT exploits a basic property of mesh networks: even when no node receives a packet correctly, any given bit is likely to be received by some node correctly. Instead of insisting on forwarding only correct packets, MIXIT routers use physical layer hints to make their best guess about which bits in a corrupted packet are likely to be correct and forward them to the destination. Even though this approach inevitably lets erroneous bits through, we find that it can achieve high throughput without compromising end-to-end reliability. The core component of MIXIT is a novel network code that operates on small groups of bits, called symbols. It allows the nodes to opportunistically route groups of bits to their destination with low overhead. MIXIT’s network code also incorporates an end-to-end error correction component that the destination uses to correct any errors that might seep through. We have implemented MIXIT on a software radio platform running the Zigbee radio protocol. Our experiments on a 25-node indoor testbed show that MIXIT has a throughput gain of 2.8 × over MORE, a state-of-the-art opportunistic routing scheme, and about 3.9 × over traditional routing using the ETX metric.
Interactive WiFi Connectivity For Moving Vehicles
"... We ask if the ubiquity of WiFi can be leveraged to provide cheap connectivity from moving vehicles for common applications such as Web browsing and VoIP. Driven by this question, we conduct a study of connection quality available to vehicular WiFi clients based on measurements from testbeds in two d ..."
Abstract
-
Cited by 79 (8 self)
- Add to MetaCart
We ask if the ubiquity of WiFi can be leveraged to provide cheap connectivity from moving vehicles for common applications such as Web browsing and VoIP. Driven by this question, we conduct a study of connection quality available to vehicular WiFi clients based on measurements from testbeds in two different cities. We find that current WiFi handoff methods, in which clients communicate with one basestation at a time, lead to frequent disruptions in connectivity. We also find that clients can overcome many disruptions by communicating with multiple basestations simultaneously. These findings lead us to develop ViFi, a protocol that opportunistically exploits basestation diversity to minimize disruptions and support interactive applications for mobile clients. ViFi uses a decentralized and lightweight probabilistic algorithm for coordination between participating basestations. Our evaluation using a twomonth long deployment and trace-driven simulations shows that its link-layer performance comes close to an ideal diversity-based protocol. Using two applications, VoIP and short TCP transfers, we show that the link layer performance improvement translates to better application performance. In our deployment, ViFi doubles the number of successful short TCP transfers and doubles the length of disruption-free VoIP sessions compared to an existing WiFi-style handoff protocol.
Network coding meets TCP
"... Abstract—We propose a mechanism that incorporates network coding into TCP with only minor changes to the protocol stack, thereby allowing incremental deployment. In our scheme, the source transmits random linear combinations of packets currently in the congestion window. At the heart of our scheme i ..."
Abstract
-
Cited by 53 (7 self)
- Add to MetaCart
(Show Context)
Abstract—We propose a mechanism that incorporates network coding into TCP with only minor changes to the protocol stack, thereby allowing incremental deployment. In our scheme, the source transmits random linear combinations of packets currently in the congestion window. At the heart of our scheme is a new interpretation of ACKs – the sink acknowledges every degree of freedom (i.e., a linear combination that reveals one unit of new information) even if it does not reveal an original packet immediately. Such ACKs enable a TCP-compatible sliding-window approach to network coding. Our scheme has the nice property that packet losses are essentially masked from the congestion control algorithm. Our algorithm therefore reacts to packet drops in a smooth manner, resulting in a novel and effective approach for congestion control over networks involving lossy links such as wireless links. Our scheme is applicable even when the intermediate nodes perform re-encoding of the data packets. Our simulations show that our algorithm, with or without re-encoding inside the network, achieves much higher throughput compared to TCP over lossy wireless links. We also establish the soundness and fairness properties of our algorithm. Finally, we present queuing analysis for the case of intermediate node re-encoding. I.
An Empirical Study of Low-Power Wireless
, 2010
"... We present empirical measurements of the packet delivery performance of the latest sensor platforms: Micaz and Telos motes. In this article, we present observations that have implications to a set of common assumptions protocol designers make while designing sensornet protocols— specifically—the MAC ..."
Abstract
-
Cited by 51 (1 self)
- Add to MetaCart
We present empirical measurements of the packet delivery performance of the latest sensor platforms: Micaz and Telos motes. In this article, we present observations that have implications to a set of common assumptions protocol designers make while designing sensornet protocols— specifically—the MAC and network layer protocols. We first distill these common assumptions in to a conceptual model and show how our observations support or dispute these assumptions. We also present case studies of protocols that do not make these assumptions. Understanding the implications of these observations to the conceptual model can improve future protocol designs.
SourceSync: A Distributed Wireless Architecture for Exploiting Sender Diversity
"... Diversity is an intrinsic property of wireless networks. Recent years have witnessed the emergence of many distributed protocols like ExOR, MORE, SOAR, SOFT, and MIXIT that exploit receiver diversity in 802.11-like networks. In contrast, the dual of receiver diversity, sender diversity, has remained ..."
Abstract
-
Cited by 42 (6 self)
- Add to MetaCart
(Show Context)
Diversity is an intrinsic property of wireless networks. Recent years have witnessed the emergence of many distributed protocols like ExOR, MORE, SOAR, SOFT, and MIXIT that exploit receiver diversity in 802.11-like networks. In contrast, the dual of receiver diversity, sender diversity, has remained largely elusive to such networks. This paper presents SourceSync, a distributed architecture for harnessing sender diversity. SourceSync enables concurrent senders to synchronize their transmissions to symbol boundaries, and cooperate to forward packets at higher data rates than they could have achieved by transmitting separately. The paper shows that SourceSync improves the performance of opportunistic routing protocols. Specifically, SourceSync allows all nodes that overhear a packet in a wireless mesh to simultaneously transmit it to their nexthops, in contrast to existing opportunistic routing protocols that are forced to pick a single forwarder from among the overhearing nodes. Such simultaneous transmission reduces bit errors and improves throughput. The paper also shows that SourceSync increases the throughput of 802.11 last hop diversity protocols by allowing multiple APs to transmit simultaneously to a client, thereby harnessing sender diversity. We have implemented SourceSync on the FPGA of an 802.11-like radio platform. We have also evaluated our system in an indoor wireless testbed, empirically showing its benefits.
CCACK: Efficient Network Coding Based Opportunistic Routing Through Cumulative Coded Acknowledgments
, 2009
"... Abstract—The use of random linear network coding (NC) has significantly simplified the design of opportunistic routing (OR) protocols by removing the need of coordination among forwarding nodes for avoiding duplicate transmissions. However, NC-based OR protocols face a new challenge: How many coded ..."
Abstract
-
Cited by 37 (4 self)
- Add to MetaCart
(Show Context)
Abstract—The use of random linear network coding (NC) has significantly simplified the design of opportunistic routing (OR) protocols by removing the need of coordination among forwarding nodes for avoiding duplicate transmissions. However, NC-based OR protocols face a new challenge: How many coded packets should each forwarder transmit? To avoid the overhead of feedback exchange, most practical existing NC-based OR protocols compute offline the expected number of transmissions for each forwarder using heuristics based on periodic measurements of the average link loss rates and the ETX metric. Although attractive due to their minimal coordination overhead, these approaches may suffer significant performance degradation in dynamic wireless environments with continuously changing levels of channel gains, interference, and background traffic. In this paper, we propose CCACK, a new efficient NCbased OR protocol. CCACK exploits a novel Cumulative Coded ACKnowledgment scheme that allows nodes to acknowledge network coded traffic to their upstream nodes in a simple way, oblivious to loss rates, and with practically zero overhead. In addition, the cumulative coded acknowledgment scheme in CCACK enables an efficient credit-based, rate control algorithm. Our evaluation shows that, compared to MORE, a state-of-theart NC-based OR protocol, CCACK improves both throughput and fairness, by up to 20x and 124%, respectively, with average improvements of 45 % and 8.8%, respectively. I.
