Results 1  10
of
143
Singlepixel imaging via compressive sampling
 IEEE Signal Processing Magazine
"... Humans are visual animals, and imaging sensors that extend our reach – cameras – have improved dramatically in recent times thanks to the introduction of CCD and CMOS digital technology. Consumer digital cameras in the megapixel range are now ubiquitous thanks to the happy coincidence that the semi ..."
Abstract

Cited by 296 (19 self)
 Add to MetaCart
(Show Context)
Humans are visual animals, and imaging sensors that extend our reach – cameras – have improved dramatically in recent times thanks to the introduction of CCD and CMOS digital technology. Consumer digital cameras in the megapixel range are now ubiquitous thanks to the happy coincidence that the semiconductor material of choice for largescale electronics integration (silicon) also happens to readily convert photons at visual wavelengths into electrons. On the contrary, imaging at wavelengths where silicon is blind is considerably more complicated, bulky, and expensive. Thus, for comparable resolution, a $500 digital camera for the visible becomes a $50,000 camera for the infrared. In this paper, we present a new approach to building simpler, smaller, and cheaper digital cameras that can operate efficiently across a much broader spectral range than conventional siliconbased cameras. Our approach fuses a new camera architecture based on a digital micromirror device (DMD – see Sidebar: Spatial Light Modulators) with the new mathematical theory and algorithms of compressive sampling (CS – see Sidebar: Compressive Sampling in a Nutshell). CS combines sampling and compression into a single nonadaptive linear measurement process [1–4]. Rather than measuring pixel samples of the scene under view, we measure inner products
Sampling theorems for signals from the union of finitedimensional linear subspaces
 IEEE Trans. on Inform. Theory
, 2009
"... Compressed sensing is an emerging signal acquisition technique that enables signals to be sampled well below the Nyquist rate, given that the signal has a sparse representation in an orthonormal basis. In fact, sparsity in an orthonormal basis is only one possible signal model that allows for sampli ..."
Abstract

Cited by 110 (14 self)
 Add to MetaCart
(Show Context)
Compressed sensing is an emerging signal acquisition technique that enables signals to be sampled well below the Nyquist rate, given that the signal has a sparse representation in an orthonormal basis. In fact, sparsity in an orthonormal basis is only one possible signal model that allows for sampling strategies below the Nyquist rate. In this paper we consider a more general signal model and assume signals that live on or close to the union of linear subspaces of low dimension. We present sampling theorems for this model that are in the same spirit as the NyquistShannon sampling theorem in that they connect the number of required samples to certain model parameters. Contrary to the NyquistShannon sampling theorem, which gives a necessary and sufficient condition for the number of required samples as well as a simple linear algorithm for signal reconstruction, the model studied here is more complex. We therefore concentrate on two aspects of the signal model, the existence of one to one maps to lower dimensional observation spaces and the smoothness of the inverse map. We show that almost all linear maps are one to one when the observation space is at least of the same dimension as the largest dimension of the convex hull of the union of any two subspaces in the model. However, we also show that in order for the inverse map to have certain smoothness properties such as a given finite Lipschitz constant, the required observation dimension necessarily depends logarithmically
Structured compressed sensing: From theory to applications
 IEEE TRANS. SIGNAL PROCESS
, 2011
"... Compressed sensing (CS) is an emerging field that has attracted considerable research interest over the past few years. Previous review articles in CS limit their scope to standard discretetodiscrete measurement architectures using matrices of randomized nature and signal models based on standard ..."
Abstract

Cited by 104 (16 self)
 Add to MetaCart
Compressed sensing (CS) is an emerging field that has attracted considerable research interest over the past few years. Previous review articles in CS limit their scope to standard discretetodiscrete measurement architectures using matrices of randomized nature and signal models based on standard sparsity. In recent years, CS has worked its way into several new application areas. This, in turn, necessitates a fresh look on many of the basics of CS. The random matrix measurement operator must be replaced by more structured sensing architectures that correspond to the characteristics of feasible acquisition hardware. The standard sparsity prior has to be extended to include a much richer class of signals and to encode broader data models, including continuoustime signals. In our overview, the theme is exploiting signal and measurement structure in compressive sensing. The prime focus is bridging theory and practice; that is, to pinpoint the potential of structured CS strategies to emerge from the math to the hardware. Our summary highlights new directions as well as relations to more traditional CS, with the hope of serving both as a review to practitioners wanting to join this emerging field, and as a reference for researchers that attempts to put some of the existing ideas in perspective of practical applications.
Signal Processing with Compressive Measurements
, 2009
"... The recently introduced theory of compressive sensing enables the recovery of sparse or compressible signals from a small set of nonadaptive, linear measurements. If properly chosen, the number of measurements can be much smaller than the number of Nyquistrate samples. Interestingly, it has been sh ..."
Abstract

Cited by 102 (25 self)
 Add to MetaCart
(Show Context)
The recently introduced theory of compressive sensing enables the recovery of sparse or compressible signals from a small set of nonadaptive, linear measurements. If properly chosen, the number of measurements can be much smaller than the number of Nyquistrate samples. Interestingly, it has been shown that random projections are a nearoptimal measurement scheme. This has inspired the design of hardware systems that directly implement random measurement protocols. However, despite the intense focus of the community on signal recovery, many (if not most) signal processing problems do not require full signal recovery. In this paper, we take some first steps in the direction of solving inference problems—such as detection, classification, or estimation—and filtering problems using only compressive measurements and without ever reconstructing the signals involved. We provide theoretical bounds along with experimental results.
The smashed filter for compressive classification and target recognition
 in Proc. IS&T/SPIE Symposium on Electronic Imaging: Computational Imaging
, 2007
"... The theory of compressive sensing (CS) enables the reconstruction of a sparse or compressible image or signal from a small set of linear, nonadaptive (even random) projections. However, in many applications, including object and target recognition, we are ultimately interested in making a decision ..."
Abstract

Cited by 71 (19 self)
 Add to MetaCart
(Show Context)
The theory of compressive sensing (CS) enables the reconstruction of a sparse or compressible image or signal from a small set of linear, nonadaptive (even random) projections. However, in many applications, including object and target recognition, we are ultimately interested in making a decision about an image rather than computing a reconstruction. We propose here a framework for compressive classification that operates directly on the compressive measurements without first reconstructing the image. We dub the resulting dimensionally reduced matched filter the smashed filter. The first part of the theory maps traditional maximum likelihood hypothesis testing into the compressive domain; we find that the number of measurements required for a given classification performance level does not depend on the sparsity or compressibility of the images but only on the noise level. The second part of the theory applies the generalized maximum likelihood method to deal with unknown transformations such as the translation, scale, or viewing angle of a target object. We exploit the fact the set of transformed images forms a lowdimensional, nonlinear manifold in the highdimensional image space. We find that the number of measurements required for a given classification performance level grows linearly in the dimensionality of the manifold but only logarithmically in the number of pixels/samples and image classes. Using both simulations and measurements from a new singlepixel compressive camera, we demonstrate the effectiveness of the smashed filter for target classification using very few measurements.
Detection and Estimation with Compressive Measurements
, 2006
"... The recently introduced theory of compressed sensing enables the reconstruction of sparse or compressible signals from a small set of nonadaptive, linear measurements. If properly chosen, the number of measurements can be much smaller than the number of Nyquist rate samples. Interestingly, it has be ..."
Abstract

Cited by 49 (5 self)
 Add to MetaCart
(Show Context)
The recently introduced theory of compressed sensing enables the reconstruction of sparse or compressible signals from a small set of nonadaptive, linear measurements. If properly chosen, the number of measurements can be much smaller than the number of Nyquist rate samples. Interestingly, it has been shown that random projections are a satisfactory measurement scheme. This has inspired the design of physical systems that directly implement similar measurement schemes. However, despite the intense focus on the reconstruction of signals, many (if not most) signal processing problems do not require a full reconstruction of the signal – we are often interested only in solving some sort of detection problem or in the estimation of some function of the data. In this report, we show that the compressed sensing framework is useful for a wide range of statistical inference tasks. In particular, we demonstrate how to solve a variety of signal detection and estimation problems given the measurements without ever reconstructing the signals themselves. We provide theoretical bounds along with experimental results. 1
LowDimensional Models for Dimensionality Reduction and Signal Recovery: A Geometric Perspective
, 2009
"... We compare and contrast from a geometric perspective a number of lowdimensional signal models that support stable informationpreserving dimensionality reduction. We consider sparse and compressible signal models for deterministic and random signals, structured sparse and compressible signal model ..."
Abstract

Cited by 47 (12 self)
 Add to MetaCart
(Show Context)
We compare and contrast from a geometric perspective a number of lowdimensional signal models that support stable informationpreserving dimensionality reduction. We consider sparse and compressible signal models for deterministic and random signals, structured sparse and compressible signal models, point clouds, and manifold signal models. Each model has a particular geometrical structure that enables signal information in to be stably preserved via a simple linear and nonadaptive projection to a much lower dimensional space whose dimension either is independent of the ambient dimension at best or grows logarithmically with it at worst. As a bonus, we point out a common misconception related to probabilistic compressible signal models, that is, that the generalized Gaussian and Laplacian random models do not support stable linear dimensionality reduction.
Compressive Sensing on Manifolds Using a Nonparametric Mixture of Factor Analyzers: Algorithm and Performance Bounds 1
"... Nonparametric Bayesian methods are employed to constitute a mixture of lowrank Gaussians, for data x ∈ RN that are of high dimension N but are constrained to reside in a lowdimensional subregion of RN. The number of mixture components and their rank are inferred automatically from the data. The re ..."
Abstract

Cited by 46 (17 self)
 Add to MetaCart
(Show Context)
Nonparametric Bayesian methods are employed to constitute a mixture of lowrank Gaussians, for data x ∈ RN that are of high dimension N but are constrained to reside in a lowdimensional subregion of RN. The number of mixture components and their rank are inferred automatically from the data. The resulting algorithm can be used for learning manifolds and for reconstructing signals from manifolds, based on compressive sensing (CS) projection measurements. The statistical CS inversion is performed analytically. We derive the required number of CS random measurements needed for successful reconstruction, based on easily computed quantities, drawing on block–sparsity properties. The proposed methodology is validated on several synthetic and real datasets. I.
Simultaneous image transformation and sparse representation recovery
 IEEE Conferenece on Computer Vision and Pattern Recognition (CVPR
, 2008
"... Sparse representation in compressive sensing is gaining increasing attention due to its success in various applications. As we demonstrate in this paper, however, image sparse representation is sensitive to image plane transformations such that existing approaches can not reconstruct the sparse repr ..."
Abstract

Cited by 41 (2 self)
 Add to MetaCart
(Show Context)
Sparse representation in compressive sensing is gaining increasing attention due to its success in various applications. As we demonstrate in this paper, however, image sparse representation is sensitive to image plane transformations such that existing approaches can not reconstruct the sparse representation of a geometrically transformed image. We introduce a simple technique for obtaining transformationinvariant image sparse representation. It is rooted in two observations: 1) if the aligned model images of an object span a linear subspace, their transformed versions with respect to some group of transformations can still span a linear subspace in a higher dimension; 2) if a target (or test) image, aligned with the model images, lives in the above subspace, its prealignment versions would get closer to the subspace after applying estimated transformations with more and more accurate parameters. These observations motivate us to project a potentially unaligned target image to random projection manifolds defined by the model images and the transformation model. Each projection is then separated into the aligned projection target and a residue due to misalignment. The desired aligned projection target is then iteratively optimized by gradually diminishing the residue. In this framework, we can simultaneously recover the sparse representation of a target image and the image plane transformation between the target and the model images. We have applied the proposed methodology to two applications: face recognition, and dynamic texture registration. The improved performance over previous methods that we obtain demonstrates the effectiveness of the proposed approach. 1.
Spectral Compressive Sensing
, 2010
"... Compressive sensing (CS) is a new approach to simultaneous sensing and compression of sparse and compressible signals. A great many applications feature smooth or modulated signals that can be modeled as a linear combination of a small number of sinusoids; such signals are sparse in the frequency do ..."
Abstract

Cited by 39 (5 self)
 Add to MetaCart
(Show Context)
Compressive sensing (CS) is a new approach to simultaneous sensing and compression of sparse and compressible signals. A great many applications feature smooth or modulated signals that can be modeled as a linear combination of a small number of sinusoids; such signals are sparse in the frequency domain. In practical applications, the standard frequency domain signal representation is the discrete Fourier transform (DFT). Unfortunately, the DFT coefficients of a frequencysparse signal are themselves sparse only in the contrived case where the sinusoid frequencies are integer multiples of the DFT’s fundamental frequency. As a result, practical DFTbased CS acquisition and recovery of smooth signals does not perform nearly as well as one might expect. In this paper, we develop a new spectral compressive sensing (SCS) theory for general frequencysparse signals. The key ingredients are an oversampled DFT frame, a signal model that inhibits closely spaced sinusoids, and classical sinusoid parameter estimation algorithms from the field of spectrum estimation. Using peridogram and eigenanalysis based spectrum estimates (e.g., MUSIC), our new SCS algorithms significantly outperform the current stateoftheart CS algorithms while providing provable bounds on the number of measurements required for stable recovery.