Results 1 - 10
of
839
The capacity of wireless networks
- IEEE TRANSACTIONS ON INFORMATION THEORY
, 2000
"... When n identical randomly located nodes, each capable of transmitting at bits per second and using a fixed range, form a wireless network, the throughput @ A obtainable by each node for a randomly chosen destination is 2 bits per second under a noninterference protocol. If the nodes are optimally p ..."
Abstract
-
Cited by 3243 (42 self)
- Add to MetaCart
When n identical randomly located nodes, each capable of transmitting at bits per second and using a fixed range, form a wireless network, the throughput @ A obtainable by each node for a randomly chosen destination is 2 bits per second under a noninterference protocol. If the nodes are optimally placed in a disk of unit area, traffic patterns are optimally assigned, and each transmission’s range is optimally chosen, the bit–distance product that can be transported by the network per second is 2 @ A bit-meters per second. Thus even under optimal circumstances, the throughput is only 2 bits per second for each node for a destination nonvanishingly far away. Similar results also hold under an alternate physical model where a required signal-to-interference ratio is specified for successful receptions. Fundamentally, it is the need for every node all over the domain to share whatever portion of the channel it is utilizing with nodes in its local neighborhood that is the reason for the constriction in capacity. Splitting the channel into several subchannels does not change any of the results. Some implications may be worth considering by designers. Since the throughput furnished to each user diminishes to zero as the number of users is increased, perhaps networks connecting smaller numbers of users, or featuring connections mostly with nearby neighbors, may be more likely to be find acceptance.
Dynamic source routing in ad hoc wireless networks
- Mobile Computing
, 1996
"... An ad hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any established infrastructure or centralized administration. In such an environment, it may be necessary for one mobile host to enlist the aid of other hosts in forwarding a packet to its desti ..."
Abstract
-
Cited by 3108 (31 self)
- Add to MetaCart
(Show Context)
An ad hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any established infrastructure or centralized administration. In such an environment, it may be necessary for one mobile host to enlist the aid of other hosts in forwarding a packet to its destination, due to the limited range of each mobile host’s wireless transmissions. This paper presents a protocol for routing in ad hoc networks that uses dynamic source routing. The protocol adapts quickly to routing changes when host movement is frequent, yet requires little or no overhead during periods in which hosts move less frequently. Based on results from a packet-level simulation of mobile hosts operating in an ad hoc network, the protocol performs well over a variety of environmental conditions such as host density and movement rates. For all but the highest rates of host movement simulated, the overhead of the protocol is quite low, falling to just 1 % of total data packets transmitted for moderate movement rates in a network of 24 mobile hosts. In all cases, the difference in length between the routes used and the optimal route lengths is negligible, and in most cases, route lengths are on average within a factor of 1.01 of optimal. 1.
GPSR: Greedy perimeter stateless routing for wireless networks
- MOBICOM
, 2000
"... We present Greedy Perimeter Stateless Routing (GPSR), a novel routing protocol for wireless datagram networks that uses the positions of touters and a packer's destination to make packet forwarding decisions. GPSR makes greedy forwarding decisions using only information about a router's i ..."
Abstract
-
Cited by 2290 (8 self)
- Add to MetaCart
(Show Context)
We present Greedy Perimeter Stateless Routing (GPSR), a novel routing protocol for wireless datagram networks that uses the positions of touters and a packer's destination to make packet forwarding decisions. GPSR makes greedy forwarding decisions using only information about a router's immediate neighbors in the network topology. When a packet reaches a region where greedy forwarding is impossible, the algorithm recovers by routing around the perimeter of the region. By keeping state only about the local topology, GPSR scales better in per-router state than shortest-path and ad-hoc routing protocols as the number of network destinations increases. Under mobility's frequent topology changes, GPSR can use local topology information to find correct new routes quickly. We describe the GPSR protocol, and use extensive simulation of mobile wireless networks to compare its performance with that of Dynamic Source Routing. Our simulations demonstrate GPSR's scalability on densely deployed wireless networks.
A Performance Comparison of Multi-Hop Wireless Ad Hoc Network Routing Protocols
, 1998
"... An ad hoc network is a collection of wireless mobile nodes dynamically forming a temporary network without the use of any existing network infrastructure or centralized administration. Due to the limited transmission range of wireless network interfaces, multiple network "hops " ma ..."
Abstract
-
Cited by 1819 (25 self)
- Add to MetaCart
(Show Context)
An ad hoc network is a collection of wireless mobile nodes dynamically forming a temporary network without the use of any existing network infrastructure or centralized administration. Due to the limited transmission range of wireless network interfaces, multiple network "hops " may be needed for one node to exchange data with another across the network. In recent years, a variety of new routing protocols targeted specifically at this environment have been developed, but little performance information on each protocol and no realistic performance comparison between them is available. This paper presents the results of a detailed packet-level simulation comparing four multi-hop wireless ad hoc network routing protocols that cover a range of design choices: DSDV, TORA, DSR, and AODV. We have extended the ns-2 network simulator to accurately model the MAC and physical-layer behavior of the IEEE 802.11 wireless LAN standard, including a realistic wireless transmission channel model, and present the results of simulations of networks of 50 mobile nodes. 1
An Energy-Efficient MAC Protocol for Wireless Sensor Networks
, 2002
"... This paper proposes S-MAC, a medium-access control (MAC) protocol designed for wireless sensor networks. Wireless sensor networks use battery-operated computing and sensing devices. A network of these devices will collaborate for a common application such as environmental monitoring. We expect senso ..."
Abstract
-
Cited by 1517 (36 self)
- Add to MetaCart
(Show Context)
This paper proposes S-MAC, a medium-access control (MAC) protocol designed for wireless sensor networks. Wireless sensor networks use battery-operated computing and sensing devices. A network of these devices will collaborate for a common application such as environmental monitoring. We expect sensor networks to be deployed in an ad hoc fashion, with individual nodes remaining largely inactive for long periods of time, but then becoming suddenly active when something is detected. These characteristics of sensor networks and applications motivate a MAC that is different from traditional wireless MACs such as IEEE 802.11 in almost every way: energy conservation and self-configuration are primary goals, while per-node fairness and latency are less important. S-MAC uses three novel techniques to reduce energy consumption and support self-configuration. To reduce energy consumption in listening to an idle channel, nodes periodically sleep. Neighboring nodes form virtual clusters to auto-synchronize on sleep schedules. Inspired by PAMAS, S-MAC also sets the radio to sleep during transmissions of other nodes. Unlike PAMAS, it only uses in-channel signaling. Finally, S-MAC applies message passing to reduce contention latency for sensor-network applications that require store-andforward processing as data move through the network. We evaluate our implementation of S-MAC over a sample sensor node, the Mote, developed at University of California, Berkeley. The experiment results show that, on a source node, an 802.11-like MAC consumes 2--6 times more energy than S-MAC for traffic load with messages sent every 1-10s.
Ariadne: a secure on-demand routing protocol for ad hoc networks," in
- Proc. 8th ACM International Conf. Mobile Computing Networking ,
, 2002
"... Abstract An ad hoc network is a group of wireless mobile computers (or nodes), in which individual nodes cooperate by forwarding packets for each other to allow nodes to communicate beyond direct wireless transmission range. Prior research in ad hoc networking has generally studied the routing prob ..."
Abstract
-
Cited by 925 (12 self)
- Add to MetaCart
Abstract An ad hoc network is a group of wireless mobile computers (or nodes), in which individual nodes cooperate by forwarding packets for each other to allow nodes to communicate beyond direct wireless transmission range. Prior research in ad hoc networking has generally studied the routing problem in a non-adversarial setting, assuming a trusted environment. In this paper, we present attacks against routing in ad hoc networks, and we present the design and performance evaluation of a new secure on-demand ad hoc network routing protocol, called Ariadne. Ariadne prevents attackers or compromised nodes from tampering with uncompromised routes consisting of uncompromised nodes, and also prevents many types of Denial-of-Service attacks. In addition, Ariadne is efficient, using only highly efficient symmetric cryptographic primitives.
Secure Routing in Wireless Sensor Networks: Attacks and Countermeasures
-
, 2003
"... We consider routing security in wireless sensor networks. Many sensor network routing protocols have been proposed, but none of them have been designed with security as agq1( We propose securitygcur forrouting in sensor networks, show how attacks agacks ad-hoc and peer-to-peer networks can be ..."
Abstract
-
Cited by 827 (3 self)
- Add to MetaCart
We consider routing security in wireless sensor networks. Many sensor network routing protocols have been proposed, but none of them have been designed with security as agq1( We propose securitygcur forrouting in sensor networks, show how attacks agacks ad-hoc and peer-to-peer networks can be adapted into powerful attacks agacks sensor networks, introduce two classes of novel attacks agacks sensor networks----sinkholes and HELLO floods, and analyze the security of all the major sensor networkrouting protocols. We describe crippling attacks against all of them and sug@(5 countermeasures anddesig considerations. This is the first such analysis of secure routing in sensor networks.
Power-Aware Routing in Mobile Ad Hoc Networks
, 1998
"... In this paper we present a case for using new power-aware metrics for determining routes in wireless ad hoc networks. We present five different metrics based on battery power consumption at nodes. We show that using these metrics in a shortest-cost routing algorithm reduces the cost/packet of rout ..."
Abstract
-
Cited by 775 (5 self)
- Add to MetaCart
In this paper we present a case for using new power-aware metrics for determining routes in wireless ad hoc networks. We present five different metrics based on battery power consumption at nodes. We show that using these metrics in a shortest-cost routing algorithm reduces the cost/packet of routing packets by 5-30% over shortest-hop routing (this cost reduction is on top of a 40-70% reduction in energy consumption obtained by using PAMAS, our MAC layer protocol). Furthermore, using these new metrics ensures that the mean time to node failure is increased significantly. An interesting property of using shortest-cost routing is that packet delays do not increase. Finally, we note that our new metrics can be used in most traditional routing protocols for ad hoc networks. 1
DSR: The Dynamic Source Routing Protocol for Multi-Hop Wireless Ad Hoc Networks”, in Ad Hoc Networking, edited by Charles E.
- Perkins, Chapter
, 2001
"... Abstract The Dynamic Source Routing protocol (DSR) is a simple and efficient routing protocol designed specifically for use in multi-hop wireless ad hoc networks of mobile nodes. DSR allows the network to be completely self-organizing and self-configuring, without the need for any existing network ..."
Abstract
-
Cited by 764 (8 self)
- Add to MetaCart
Abstract The Dynamic Source Routing protocol (DSR) is a simple and efficient routing protocol designed specifically for use in multi-hop wireless ad hoc networks of mobile nodes. DSR allows the network to be completely self-organizing and self-configuring, without the need for any existing network infrastructure or administration. The protocol is composed of the two mechanisms of Route Discovery and Route Maintenance, which work together to allow nodes to discover and maintain source routes to arbitrary destinations in the ad hoc network. The use of source routing allows packet routing to be trivially loop-free, avoids the need for up-to-date routing information in the intermediate nodes through which packets are forwarded, and allows nodes forwarding or overhearing packets to cache the routing information in them for their own future use. All aspects of the protocol operate entirely on-demand, allowing the routing packet overhead of DSR to scale automatically to only that needed to react to changes in the routes currently in use. We have evaluated the operation of DSR through detailed simulation on a variety of movement and communication patterns, and through implementation and significant experimentation in a physical outdoor ad hoc networking testbed we have constructed in Pittsburgh, and have demonstrated the excellent performance of the protocol. In this chapter, we describe the design of DSR and provide a summary of some of our simulation and testbed implementation results for the protocol.
Medium Access Control with Coordinated Adaptive Sleeping for Wireless Sensor Networks
- IEEE/ACM Transactions on Networking
, 2004
"... This paper proposes S-MAC, a medium access control (MAC) protocol designed for wireless sensor networks. Wireless sensor networks use battery-operated computing and sensing devices. A network of these devices will collaborate for a common application such as environmental monitoring. We expect senso ..."
Abstract
-
Cited by 702 (15 self)
- Add to MetaCart
(Show Context)
This paper proposes S-MAC, a medium access control (MAC) protocol designed for wireless sensor networks. Wireless sensor networks use battery-operated computing and sensing devices. A network of these devices will collaborate for a common application such as environmental monitoring. We expect sensor networks to be deployed in an ad hoc fashion, with nodes remaining largely inactive for long time, but becoming suddenly active when something is detected. These characteristics of sensor networks and applications motivate a MAC that is different from traditional wireless MACs such as IEEE 802.11 in several ways: energy conservation and self-configuration are primary goals, while per-node fairness and latency are less important. S-MAC uses a few novel techniques to reduce energy consumption and support self-configuration. It enables low-duty-cycle operation in a multihop network. Nodes form virtual clusters based on common sleep schedules to reduce control overhead and enable traffic-adaptive wake-up. S-MAC uses in-channel signaling to avoid overhearing unnecessary traffic. Finally, S-MAC applies message passing to reduce contention latency for applications that require in-network data processing. The paper presents measurement results of S-MAC performance on a sample sensor node, the UC Berkeley Mote, and reveals fundamental tradeoffs on energy, latency and throughput. Results show that S-MAC obtains significant energy savings compared with an 802.11-like MAC without sleeping.
