"... In PAGE 3: ...Tables and figures Table1 - Summary of major international legislative and regulatory 10 processes considered by the review Table 2 - Forest-related reporting requirements for major international 11 legislative and regulatory processes Table 3 - EU policy and information requirements in relation to biodiversity 25 Table 4 - Classification of Level I and Level II Forest Focus plots in Poland 26 by EEA Forest type Table 5 - Level I and Level II plots coinciding with Natura woodland habitat 26 and official sites in Poland Table 6 - Forest Focus Pilot projects related to climate change questions 30 Table 7 - Forest-related reporting requirements for major international. 39 legislative and regulatory processes Figure 1 - Number of plots in relation to the area of forest land in the 20 individual member states Figure 2 - Proposed structure of a new EU Forest Information 38 System (FIS) Annexes Annex 1 - The revised scheme of European Forest Types nomenclature 42 for biodiversity assessment (from Barbati et al.... In PAGE 8: ... Under Activity 1.1 the review specifically focussed on the major, global and European legislative and regulatory processes summarised at Table1 . This activity included the development of a dedicated meta-database supporting downstream analytical components of the review.... ..."

"... In PAGE 22: ... Firms can apply analytical models to previous data and obtain important information to make better decisions (Swaminathan and Tayur 2003). Table10 shows the literature review on e-procurement. The general aspects of how firms use Internet to streamline the process and which are the factors leading to a higher willingness to adopt Internet procurement, have been covered by empirical studies (see: (Boyer and Olson 2002), (Min and Galle 1999) and (Olson and Boyer 2003).... ..."

"... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table4 -1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table 4-2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table 4-1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table4 -2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 44: ...Process Sampling and Analysis Program Rev. 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-3 A variety of methods are listed in Table4 -2 and may be used for analysis as long as detection limits, range, and/or accuracy requirements are met. Table 4-1.... In PAGE 44: ... 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-3 A variety of methods are listed in Table 4-2 and may be used for analysis as long as detection limits, range, and/or accuracy requirements are met. Table4 -1. Process Sample Locations, Analytes/Parameters, Matrices, and Frequencies for ISRM Pre-Injection Analysis.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table4 -3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table 4-4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table 4-3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table4 -4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ... The composite sample will be used to periodically track the makeup of the purgewater being directed to and/or within the evaporation pond structure. Table4 -3. Process Sample Locations, Field Parameters, Matrices, and Frequencies for ISRM Process/Operational Analysis.... In PAGE 45: ... Sampling frequency will be dependent on knowledge obtained from previous injection/withdrawal stages and waste discharge methodology selection. Table4 -4. Analytical Requirements for Process/Operational Sampling.... In PAGE 46: ...Process Sampling and Analysis Program Rev. 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-5 Table4 -4. Analytical Requirements for Process/Operational Sampling.... In PAGE 47: ...5 SAMPLE HANDLING AND ANALYSIS Samples collected for onsite field screening will be analyzed at the ISRM mobile trailer. During routine system operations, field-screening samples obtained from the injection, reaction, and withdrawal portions of the treatment will be analyzed at the frequencies listed in Table4 -1. In addition, the U.... ..."

"... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table4 -1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table 4-2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table 4-1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table4 -2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 44: ...Process Sampling and Analysis Program Rev. 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-3 A variety of methods are listed in Table4 -2 and may be used for analysis as long as detection limits, range, and/or accuracy requirements are met. Table 4-1.... In PAGE 44: ... 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-3 A variety of methods are listed in Table 4-2 and may be used for analysis as long as detection limits, range, and/or accuracy requirements are met. Table4 -1. Process Sample Locations, Analytes/Parameters, Matrices, and Frequencies for ISRM Pre-Injection Analysis.... In PAGE 44: ... Anions to be analyzed for are Cl, NO2, NO3, F, and SO4. Table4 -2. Analytical Requirements for Pre-Injection Sampling.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table4 -3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table 4-4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table 4-3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table4 -4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ... The composite sample will be used to periodically track the makeup of the purgewater being directed to and/or within the evaporation pond structure. Table4 -3. Process Sample Locations, Field Parameters, Matrices, and Frequencies for ISRM Process/Operational Analysis.... In PAGE 46: ...Process Sampling and Analysis Program Rev. 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-5 Table4 -4. Analytical Requirements for Process/Operational Sampling.... In PAGE 47: ...5 SAMPLE HANDLING AND ANALYSIS Samples collected for onsite field screening will be analyzed at the ISRM mobile trailer. During routine system operations, field-screening samples obtained from the injection, reaction, and withdrawal portions of the treatment will be analyzed at the frequencies listed in Table4 -1. In addition, the U.... ..."

"... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table4 -1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table 4-2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table 4-1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table4 -2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 44: ...Process Sampling and Analysis Program Rev. 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-3 A variety of methods are listed in Table4 -2 and may be used for analysis as long as detection limits, range, and/or accuracy requirements are met. Table 4-1.... In PAGE 44: ... 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-3 A variety of methods are listed in Table 4-2 and may be used for analysis as long as detection limits, range, and/or accuracy requirements are met. Table4 -1. Process Sample Locations, Analytes/Parameters, Matrices, and Frequencies for ISRM Pre-Injection Analysis.... In PAGE 44: ... Anions to be analyzed for are Cl, NO2, NO3, F, and SO4. Table4 -2. Analytical Requirements for Pre-Injection Sampling.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table4 -3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table 4-4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table 4-3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table4 -4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ... The composite sample will be used to periodically track the makeup of the purgewater being directed to and/or within the evaporation pond structure. Table4 -3. Process Sample Locations, Field Parameters, Matrices, and Frequencies for ISRM Process/Operational Analysis.... In PAGE 45: ... Sampling frequency will be dependent on knowledge obtained from previous injection/withdrawal stages and waste discharge methodology selection. Table4 -4. Analytical Requirements for Process/Operational Sampling.... In PAGE 47: ...5 SAMPLE HANDLING AND ANALYSIS Samples collected for onsite field screening will be analyzed at the ISRM mobile trailer. During routine system operations, field-screening samples obtained from the injection, reaction, and withdrawal portions of the treatment will be analyzed at the frequencies listed in Table4 -1. In addition, the U.... ..."

"... In PAGE 3: ... 3. Results The set of convergence foci obtained from the AGES meta-image of 30 previous studies of verbal working memory are listed in Table1 . When compared to the set of foci identified empirically in our fMRI study of delayed serial recall task performance, there is a readily apparent corres- pondence: 11 of the 13 foci identified with the meta-analysis fell within 15 mm of a foci of activation identified in our empirical study (Table 1).... In PAGE 3: ... Results The set of convergence foci obtained from the AGES meta-image of 30 previous studies of verbal working memory are listed in Table 1. When compared to the set of foci identified empirically in our fMRI study of delayed serial recall task performance, there is a readily apparent corres- pondence: 11 of the 13 foci identified with the meta-analysis fell within 15 mm of a foci of activation identified in our empirical study ( Table1 ). Furthermore, the meta-analytically derived regions are consistent with those found in prior reviews/meta-analyses of the verbal working memory literat- ure [3,4,6].... ..."

"... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table4 -1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table 4-2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 43: ... The pre-injection results will be compared with both the process/operational and performance monitoring results to determine the effectiveness of the ISRM emplacement process. Table 4-1 lists the sample matrix, analytes/parameters of concern, and the frequency at which pre-injection samples will be taken, and Table4 -2 reviews the analytical requirements. Samples can be obtained from either the injection/withdrawal wells or... In PAGE 44: ...Process Sampling and Analysis Program Rev. 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-3 A variety of methods are listed in Table4 -2 and may be used for analysis as long as detection limits, range, and/or accuracy requirements are met. Table 4-1.... In PAGE 44: ... Anions to be analyzed for are Cl, NO2, NO3, F, and SO4. Table4 -2. Analytical Requirements for Pre-Injection Sampling.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table4 -3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table 4-4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ....2.2 Process/Operational Sampling The purpose of process/operational sampling is to define the performance of the ISRM emplacement during the injection, reaction, and withdrawal stages. Table 4-3 lists the sample matrix, analytes/parameters of concern, and frequency at which process/operational samples will be taken, and Table4 -4 reviews the analytical requirements. Samples can be obtained from the injection/withdrawal wells or observation wells.... In PAGE 45: ... The composite sample will be used to periodically track the makeup of the purgewater being directed to and/or within the evaporation pond structure. Table4 -3. Process Sample Locations, Field Parameters, Matrices, and Frequencies for ISRM Process/Operational Analysis.... In PAGE 45: ... Sampling frequency will be dependent on knowledge obtained from previous injection/withdrawal stages and waste discharge methodology selection. Table4 -4. Analytical Requirements for Process/Operational Sampling.... In PAGE 46: ...Process Sampling and Analysis Program Rev. 1 RDR/RAWP for the 100-HR-3 Groundwater Operable Unit In Situ Redox Manipulation June 2000 4-5 Table4 -4. Analytical Requirements for Process/Operational Sampling.... In PAGE 47: ...5 SAMPLE HANDLING AND ANALYSIS Samples collected for onsite field screening will be analyzed at the ISRM mobile trailer. During routine system operations, field-screening samples obtained from the injection, reaction, and withdrawal portions of the treatment will be analyzed at the frequencies listed in Table4 -1. In addition, the U.... ..."

"... In PAGE 8: ....1%) and other (7.9%). Table2 compares CRTs and RRTs by primary job or job title. There were no significant differences (p gt;.... In PAGE 53: ... The Sign Test comparisons between video clips and lecture, laboratory, and written materials were all significant, p lt; .001, and are listed in Table2 . Common themes from open-ended interview questions were that students used the video clips mainly for review prior to both tests, valued the ability to replay content, found concepts clearer after viewing, and visualized procedures more easily.... ..."