A Resilient Overlay Network (RON) is an architecture that allows distributed Internet applications to detect and recover from path outages and periods of degraded performance within several seconds, improving over today’s wide-area routing protocols that take at least several minutes to recover. A RON is an application-layer overlay on top of the existing Internet routing substrate. The RON nodes monitor the functioning and quality of the Internet paths among themselves, and use this information to decide whether to route packets directly over the Internet or by way of other RON nodes, optimizing application-specific routing metrics. Results from two sets of measurements of a working RON deployed at sites scattered across the Internet demonstrate the benefits of our architecture. For instance, over a 64-hour sampling period in March 2001 across a twelve-node RON, there were 32 significant outages, each lasting over thirty minutes, over the 132 measured paths. RON’s routing mechanism was able to detect, recover, and route around all of them, in less than twenty seconds on average, showing that its methods for fault detection and recovery work well at discovering alternate paths in the Internet. Furthermore, RON was able to improve the loss rate, latency, or throughput perceived by data transfers; for example, about 5 % of the transfers doubled their TCP throughput and 5 % of our transfers saw their loss probability reduced by 0.05. We found that forwarding packets via at most one intermediate RON node is sufficient to overcome faults and improve performance in most cases. These improvements, particularly in the area of fault detection and recovery, demonstrate the benefits of moving some of the control over routing into the hands of end-systems.

We describe a new scalable application-layer multicast protocol, specifically designed for low-bandwidth, data streaming applications with large receiver sets. Our scheme is based upon a hierarchical clustering of the application-layer multicast peers and can support a number of different data delivery trees with specific desirable properties. We show that group members maintain state for a constant number of other membersand the control overhead is also a constant.

Overcast is an application-level multicasting system that can be incrementally deployed using today's Internet infrastructure. These properties stem from Overcast's implementation as an overlay network. An overlay network consists of a collection of nodes placed at strategic locations in an existing network fabric. These nodes implement a network abstraction on top of the network provided by the underlying substrate network.

Abstract — In this paper, we present the design, implementation, and evaluation of the iPlane, a scalable service providing accurate predictions of Internet path performance for emerging overlay services. Unlike the more common black box latency prediction techniques in use today, the iPlane builds an explanatory model of the Internet. We predict end-to-end performance by composing measured performance of segments of known Internet paths. This method allows us to accurately and efficiently predict latency, bandwidth, capacity and loss rates between arbitrary Internet hosts. We demonstrate the feasibility and utility of the iPlane service by applying it to several representative overlay services in use today: content distribution, swarming peer-to-peer filesharing, and voice-over-IP. In each case, we observe that using iPlane’s predictions leads to a significant improvement in end user performance. 1

Abstract — A recent trend in routing research is to avoid inefficiencies in network-level routing by allowing hosts to either choose routes themselves (e.g., source routing) or use overlay routing networks (e.g., Detour or RON). Such approaches result in selfish routing, because routing decisions are no longer based on system-wide criteria but are instead designed to optimize hostbased or overlay-based metrics. A series of theoretical results showing that selfish routing can result in suboptimal system behavior have cast doubts on this approach. In this paper, we use a game-theoretic approach to investigate the performance of selfish routing in Internet-like environments, using realistic topologies and traffic demands in our simulations. We show that in contrast to theoretical worst cases, selfish routing achieves close to optimal average latency in such environments. However, such performance benefit comes at the expense of significantly increased congestion on certain links. Moreover, the adaptive nature of selfish overlays can significantly reduce the effectiveness of traffic engineering by making network traffic less predictable.

Conventional wisdom has been that the performance limitations in the current Internet lie at the edges of the network – i.e last mile connectivity to users, or access links of stub ASes. As these links are upgraded, however, it is important to consider where new bottlenecks and hot-spots are likely to arise. In this paper, we address this question through an investigation of non-access bottlenecks. These are links within carrier ISPs or between neighboring carriers that could potentially constrain the bandwidth available to longlived TCP flows. Through an extensive measurement study, we discover, classify, and characterize bottleneck links (primarily in the U.S.) in terms of their location, latency, and available capacity. We find that about 50 % of the Internet paths explored have a nonaccess bottleneck with available capacity less than 50 Mbps, many of which limit the performance of well-connected nodes on the Internet today. Surprisingly, the bottlenecks identified are roughly equally split between intra-ISP links and peering links between ISPs. Also, we find that low-latency links, both intra-ISP and peering, have a significant likelihood of constraining available bandwidth. Finally, we discuss the implications of our findings on related issues such as choosing an access provider and optimizing routes through the network. We believe that these results could be valuable in guiding the design of future network services, such as overlay routing, in terms of which links or paths to avoid (and how to avoid them) in order to improve performance.

Computer Networks 36 �2001) 117±135 The X-Bone dynamically deploys and manages Internet overlays to reduce con®guration e€ort and increase network component sharing. The X-Bone discovers,con®gures,and monitors network resources to create overlays over existing IP networks. Overlays are useful for deploying overlapping virtual networks on shared infrastructure and for simplifying topology. The X-Bone extends current overlay management by adding dynamic resource discovery,deployment, and monitoring,and allows network components �hosts,routers) to participate simultaneously in multiple overlays. Its two-layer IP in IP tunneled overlays support existing applications and unmodi®ed routing,multicast,and DNS services in unmodi®ed host operating systems. This two-layer scheme uniquely supports recursive overlays,useful for fault tolerance and dynamic relocation. The X-Bone uses multicast to simplify resource discovery,and provides secure deployment as well as secure overlays. This paper presents the X-Bone architecture,and discusses its components and

The limitations of BGP routing in the Internet are often blamed for poor end-to-end performance and prolonged connectivity interruptions. Recent work advocates using overlays to effectively bypass BGP’s path selection in order to improve performance and fault tolerance. In this paper, we explore the possibility that BGP route control, when coupled with ISP multihoming, can provide competitive end-to-end performance and reliability. Using extensive measurements of paths between nodes in a large content distribution network, we compare the relative benefits of overlay routing and multihoming route control in terms of round-trip latency, throughput of 1MB TCP transfers, and path availability. We observe that the performance from route control employed in conjunction with multihoming to three ISPs (3-multihoming), is within 5-15 % of that from overlay routing employed in conjunction 3-multihoming, in terms of both end-to-end RTT and throughput. We also show that while multihoming cannot offer the nearly perfect resilience of overlays, it can eliminate almost all failures experienced by a singly-homed end-network. Our results demonstrate that, by leveraging the capability of multihoming route control, it is not necessary to circumvent BGP routing to extract good wide-area performance and availability from the existing routing system.

We have developed a new approach for reliably multicasting timecritical data to heterogeneous clients over mesh-based overlay networks. To facilitate intelligent content pruning, data streams are comprised of a sequence of XML packets and forwarded by application-level XML routers. XML routers perform contentbased routing of individual XML packets to other routers or clients based upon queries that describe the information needs of downstream nodes. Our PC-based XML router prototype can route an 18 Mbit per second XML stream. Our routers use

Packet loss and end-to-end delay limit delay sensitive applications over the best effort packet switched networks such as the Internet. In our previous work, we have shown that substantial reduction in packet loss can be achieved by sending packets at appropriate sending rates to a receiver from multiple senders, using disjoint paths, and by protecting packets with forward error correction. In this paper, we propose a Path Diversity with Forward error correction (PDF) system for delay sensitive applications over the Internet in which, disjoint paths from a sender to a receiver are created using a collection of relay nodes. We propose a scalable, heuristic scheme for selecting a redundant path between a sender and a receiver, and show that substantial reduction in packet loss can be achieved by dividing packets between the default path and the redundant path. NS simulations are used to verify the effectiveness of PDF system.