Results 1  10
of
314
Iterative point matching for registration of freeform curves and surfaces
, 1994
"... A heuristic method has been developed for registering two sets of 3D curves obtained by using an edgebased stereo system, or two dense 3D maps obtained by using a correlationbased stereo system. Geometric matching in general is a difficult unsolved problem in computer vision. Fortunately, in ma ..."
Abstract

Cited by 660 (8 self)
 Add to MetaCart
A heuristic method has been developed for registering two sets of 3D curves obtained by using an edgebased stereo system, or two dense 3D maps obtained by using a correlationbased stereo system. Geometric matching in general is a difficult unsolved problem in computer vision. Fortunately, in many practical applications, some a priori knowledge exists which considerably simplifies the problem. In visual navigation, for example, the motion between successive positions is usually approximately known. From this initial estimate, our algorithm computes observer motion with very good precision, which is required for environment modeling (e.g., building a Digital Elevation Map). Objects are represented by a set of 3D points, which are considered as the samples of a surface. No constraint is imposed on the form of the objects. The proposed algorithm is based on iteratively matching points in one set to the closest points in the other. A statistical method based on the distance distribution is used to deal with outliers, occlusion, appearance and disappearance, which allows us to do subsetsubset matching. A leastsquares technique is used to estimate 3D motion from the point correspondences, which reduces the average distance between points in the two sets. Both synthetic and real data have been used to test the algorithm, and the results show that it is efficient and robust, and yields an accurate motion estimate.
Direct least Square Fitting of Ellipses
, 1998
"... This work presents a new efficient method for fitting ellipses to scattered data. Previous algorithms either fitted general conics or were computationally expensive. By minimizing the algebraic distance subject to the constraint 4ac  b² = 1 the new method incorporates the ellipticity constraint ..."
Abstract

Cited by 430 (3 self)
 Add to MetaCart
(Show Context)
This work presents a new efficient method for fitting ellipses to scattered data. Previous algorithms either fitted general conics or were computationally expensive. By minimizing the algebraic distance subject to the constraint 4ac  b² = 1 the new method incorporates the ellipticity constraint into the normalization factor. The proposed method combines several advantages: (i) It is ellipsespecific so that even bad data will always return an ellipse; (ii) It can be solved naturally by a generalized eigensystem and (iii) it is extremely robust, efficient and easy to implement.
MLESAC: A New Robust Estimator with Application to Estimating Image Geometry
 Computer Vision and Image Understanding
, 2000
"... A new method is presented for robustly estimating multiple view relations from point correspondences. The method comprises two parts. The first is a new robust estimator MLESAC which is a generalization of the RANSAC estimator. It adopts the same sampling strategy as RANSAC to generate putative solu ..."
Abstract

Cited by 362 (10 self)
 Add to MetaCart
(Show Context)
A new method is presented for robustly estimating multiple view relations from point correspondences. The method comprises two parts. The first is a new robust estimator MLESAC which is a generalization of the RANSAC estimator. It adopts the same sampling strategy as RANSAC to generate putative solutions, but chooses the solution that maximizes the likelihood rather than just the number of inliers. The second part of the algorithm is a general purpose method for automatically parameterizing these relations, using the output of MLESAC. A difficulty with multiview image relations is that there are often nonlinear constraints between the parameters, making optimization a difficult task. The parameterization method overcomes the difficulty of nonlinear constraints and conducts a constrained optimization. The method is general and its use is illustrated for the estimation of fundamental matrices, image–image homographies, and quadratic transformations. Results are given for both synthetic and real images. It is demonstrated that the method gives results equal or superior to those of previous approaches. c ○ 2000 Academic Press 1.
The development and comparison of robust methods for estimating the fundamental matrix
 International Journal of Computer Vision
, 1997
"... Abstract. This paper has two goals. The first is to develop a variety of robust methods for the computation of the Fundamental Matrix, the calibrationfree representation of camera motion. The methods are drawn from the principal categories of robust estimators, viz. case deletion diagnostics, Mest ..."
Abstract

Cited by 266 (10 self)
 Add to MetaCart
Abstract. This paper has two goals. The first is to develop a variety of robust methods for the computation of the Fundamental Matrix, the calibrationfree representation of camera motion. The methods are drawn from the principal categories of robust estimators, viz. case deletion diagnostics, Mestimators and random sampling, and the paper develops the theory required to apply them to nonlinear orthogonal regression problems. Although a considerable amount of interest has focussed on the application of robust estimation in computer vision, the relative merits of the many individual methods are unknown, leaving the potential practitioner to guess at their value. The second goal is therefore to compare and judge the methods. Comparative tests are carried out using correspondences generated both synthetically in a statistically controlled fashion and from feature matching in real imagery. In contrast with previously reported methods the goodness of fit to the synthetic observations is judged not in terms of the fit to the observations per se but in terms of fit to the ground truth. A variety of error measures are examined. The experiments allow a statistically satisfying and quasioptimal method to be synthesized, which is shown to be stable with up to 50 percent outlier contamination, and may still be used if there are more than 50 percent outliers. Performance bounds are established for the method, and a variety of robust methods to estimate the standard deviation of the error and covariance matrix of the parameters are examined. The results of the comparison have broad applicability to vision algorithms where the input data are corrupted not only by noise but also by gross outliers.
Multilevel Partition of Unity Implicits
 ACM TRANSACTIONS ON GRAPHICS
, 2003
"... We present a shape representation, the multilevel partition of unity implicit surface, that allows us to construct surface models from very large sets of points. There are three key ingredients to our approach: 1) piecewise quadratic functions that capture the local shape of the surface, 2) weighti ..."
Abstract

Cited by 218 (7 self)
 Add to MetaCart
We present a shape representation, the multilevel partition of unity implicit surface, that allows us to construct surface models from very large sets of points. There are three key ingredients to our approach: 1) piecewise quadratic functions that capture the local shape of the surface, 2) weighting functions (the partitions of unity) that blend together these local shape functions, and 3) an octree subdivision method that adapts to variations in the complexity of the local shape. Our approach
A survey of freeform object representation and recognition techniques
 Computer Vision and Image Understanding
, 2001
"... Advances in computer speed, memory capacity, and hardware graphics acceleration have made the interactive manipulation and visualization of complex, detailed (and therefore large) threedimensional models feasible. These models are either painstakingly designed through an elaborate CAD process or re ..."
Abstract

Cited by 200 (1 self)
 Add to MetaCart
(Show Context)
Advances in computer speed, memory capacity, and hardware graphics acceleration have made the interactive manipulation and visualization of complex, detailed (and therefore large) threedimensional models feasible. These models are either painstakingly designed through an elaborate CAD process or reverse engineered from sculpted prototypes using modern scanning technologies and integration methods. The availability of detailed data describing the shape of an object offers the computer vision practitioner new ways to recognize and localize freeform objects. This survey reviews recent literature on both the 3D model building process and techniques used to match and identify freeform objects from imagery. c ○ 2001 Academic Press 1.
Robust parameter estimation in computer vision
 SIAM Reviews
, 1999
"... Abstract. Estimation techniques in computer vision applications must estimate accurate model parameters despite smallscale noise in the data, occasional largescale measurement errors (outliers), and measurements from multiple populations in the same data set. Increasingly, robust estimation techni ..."
Abstract

Cited by 164 (10 self)
 Add to MetaCart
(Show Context)
Abstract. Estimation techniques in computer vision applications must estimate accurate model parameters despite smallscale noise in the data, occasional largescale measurement errors (outliers), and measurements from multiple populations in the same data set. Increasingly, robust estimation techniques, some borrowed from the statistics literature and others described in the computer vision literature, have been used in solving these parameter estimation problems. Ideally, these techniques should effectively ignore the outliers and measurements from other populations, treating them as outliers, when estimating the parameters of a single population. Two frequently used techniques are leastmedian of
Variational Problems and Partial Differential Equations on Implicit Surfaces: The Framework and Examples in Image Processing and Pattern Formation
, 2000
"... this paper. The key ..."
A Robust Competitive Clustering Algorithm with Applications in Computer Vision
 IEEE Transactions on Pattern Analysis and Machine Intelligence
, 1998
"... This paper addresses three major issues associated with conventional partitional clustering, namely, sensitivity to initialization, difficulty in determining the number of clusters, and sensitivity to noise and outliers. The proposed Robust Competitive Agglomeration (RCA) algorithm starts with a lar ..."
Abstract

Cited by 115 (5 self)
 Add to MetaCart
(Show Context)
This paper addresses three major issues associated with conventional partitional clustering, namely, sensitivity to initialization, difficulty in determining the number of clusters, and sensitivity to noise and outliers. The proposed Robust Competitive Agglomeration (RCA) algorithm starts with a large number of clusters to reduce the sensitivity to initialization, and determines the actual number of clusters by a process of competitive agglomeration. Noise immunity is achieved by incorporating concepts from robust statistics into the algorithm. RCA assigns two different sets of weights for each data point: the first set of constrained weights represents degrees of sharing, and is used to create a competitive environment and to generate a fuzzy partition of the data set. The second set corresponds to robust weights, and is used to obtain robust estimates of the cluster prototypes. By choosing an appropriate distance measure in the objective function, RCA can be used to find a...
Heteroscedastic Regression in Computer Vision: Problems with Bilinear Constraint
 International Journal of Computer Vision
"... We present an algorithm to estimate the parameters of a linear model in the presence of heteroscedastic noise, i.e., each data point having a different covariance matrix. ..."
Abstract

Cited by 97 (7 self)
 Add to MetaCart
We present an algorithm to estimate the parameters of a linear model in the presence of heteroscedastic noise, i.e., each data point having a different covariance matrix.