Mobile robot localization is the problem of determining a robot's pose from sensor data. This article presents a family of probabilistic localization algorithms known as Monte Carlo Localization (MCL). MCL algorithms represent a robot's belief by a set of weighted hypotheses (samples), which approximate the posterior under a common Bayesian formulation of the localization problem. Building on the basic MCL algorithm, this article develops a more robust algorithm called MixtureMCL, which integrates two complimentary ways of generating samples in the estimation. To apply this algorithm to mobile robots equipped with range finders, a kernel density tree is learned that permits fast sampling. Systematic empirical results illustrate the robustness and computational efficiency of the approach.

. This paper addresses the problem of building large-scale geometric maps of indoor environments with mobile robots. It poses the map building problem as a constrained, probabilistic maximum-likelihood estimation problem. It then devises a practical algorithm for generating the most likely map from data, alog with the most likely path taken by the robot. Experimental results in cyclic environments of size up to 80 by 25 meter illustrate the appropriateness of the approach. Keywords: Bayes rule, expectation maximization, mobile robots, navigation, localization, mapping, maximum likelihood estimation, positioning, probabilistic reasoning 1. Introduction Over the last two decades or so, the problem of acquiring maps in indoor environments has received considerable attention in the mobile robotics community. The problem of map building is the problem of determining the location of entities-of-interest (such as: landmarks, obstacles), often relative to a global frame of reference (such as ...

This paper presents a new algorithm for mobile robot localization, called Monte Carlo Localization (MCL). MCL is a version of Markov localization, a family of probabilistic approaches that have recently been applied with great practical success. However, previous approaches were either computationally cumbersome (such as grid-based approaches that represent the state space by high-resolution 3D grids), or had to resort to extremely coarse-grained resolutions. Our approach is computationally efficient while retaining the ability to represent (almost) arbitrary distributions. MCL applies sampling-based methods for approximating probability distributions, in a way that places computation " where needed." The number of samples is adapted on-line, thereby invoking large sample sets only when necessary. Empirical results illustrate that MCL yields improved accuracy while requiring an order of magnitude less computation when compared to previous approaches. It is also much easier to implement...

Autonomous mobile robots need very reliable navigation capabilities in order to operate unattended for long periods of time. This paper reports on first results of a research program that uses partially observable Markov models to robustly track a robot's location in office environments and to direct its goal-oriented actions. The approach explicitly maintains a probability distribution over the possible locations of the robot, taking into account various sources of uncertainty, including approximate knowledge of the environment, and actuator and sensor uncertainty. A novel feature of our approach is its integration of topological map information with approximate metric information. We demonstrate the robustness of this approach in controlling an actual indoor mobile robot navigating corridors. 1 Introduction We are interested in the task of long-term autonomous navigation in an office environment (with corridors, foyers, and rooms). While the state of the art in autonomous office nav...

This article describes the software architecture of an autonomous, interactive tour-guide robot. It presents a modular and distributed software architecture, which integrates localization, mapping, collision avoidance, planning, and various modules concerned with user interaction and Web-based telepresence. At its heart, the software approach relies on probabilistic computation, on-line learning, and any-time algorithms. It enables robots to operate safely, reliably, and at high speeds in highly dynamic environments, and does not require any modifications of the environment to aid the robot's operation. Special emphasis is placed on the design of interactive capabilities that appeal to people's intuition. The interface provides new means for human-robot interaction with crowds of people in public places, and it also provides people all around the world with the ability to establish a "virtual telepresence" using the Web. To illustrate our approach, results are reported obtained in mid-...

Discrete Bayesian models have been used to model uncertainty for mobile-robot navigation, but the question of how actions should be chosen remains largely unexplored. This paper presents the optimal solution to the problem, formulated as a partially observable Markov decision process. Since solving for the optimal control policy is intractable, in general, it goes on to explore a variety of heuristic control strategies. The control strategies are compared experimentally, both in simulation and in runs on a robot. 1 Introduction A robot that delivers items and performs errands in an office environment needs to be able to navigate robustly. It should be able to overcome errors in perception and action, at worst getting lost for some period of time, but then being able to recover by re-localizing itself and continuing with its task. The Bayesian framework is particularly appropriate for modeling the robot's belief about its location (or, more generally, the state of the world). It suppl...

This paper describes the software architecture of an autonomous tour-guide/tutor robot. This robot was recently deployed in the “Deutsches Museum Bonn, ” were it guided hundreds of visitors through the museum during a six-day deployment period. The robot’s control software integrates low-level probabilistic reasoning with high-level problem solving embedded in first order logic. A collection of software innovations, described in this paper, enabled the robot to navigate at high speeds through dense crowds, while reliably avoiding collisions with obstacles—some of which could not even be perceived. Also described in this paper is a user interface tailored towards non-expert users, which was essential for the robot’s success in the museum. Based on these experiences, this paper argues that time is ripe for the development of AI-based commercial service robots that assist people in everyday life.

We propose a new probabilistic algorithm for online mapping of unknown environments with teams of robots. At the core of the algorithm is a technique that combines fast maximum likelihood map growing with a Monte Carlo localizer that uses particle representations. The combination of both yields an online algorithm that can cope with large odometric errors typically found when mapping an environment with cycles. The algorithm can be implemented distributedly on multiple robot platforms, enabling a team of robots to cooperatively generate a single map of their environment. Finally, an extension is described for acquiring three-dimensional maps, which capture the structure and visual appearance of indoor environments in 3D.

In order to re-use existing models of the environment mobile robots must be able to estimate their position and orientation in such models. Most of the existing methods for position estimation are based on special purpose sensors or aim at tracking the robot's position relative to the known starting point. This paper describes the position probability grid approach to estimating the robot's absolute position and orientation in a metric model of the environment. Our method is designed to work with standard sensors and is independent of any knowledge about the starting point. It is a Bayesian approach based on certainty grids. In each cell of such a grid we store the probability that this cell refers to the current position of the robot. These probabilities are obtained by integrating the likelihoods of sensor readings over time. Results described in this paper show that our technique is able to reliably estimate the position of a robot in complex environments. Our approach has proven to...

Localization is the process of updating the pose of a robot in an environment, based on sensor readings. In this experimental study, we compare two recent methods for localization of indoor mobile robots: Markov localization, which uses a probability distribution across a grid of robot poses; and scan matching, which uses Kalman filtering techniques based on matching sensor scans. Both these techniques are dense matching methods, that is, they match dense sets of environment features to an a priori map. To arrive at results for a range of situations, we utilize several different types of environments, and add noise to both the dead-reckoning and the sensors. Analysis shows that, roughly, the scan-matching techniques are more efficient and accurate, but Markov localization is better able to cope with large amounts of noise. These results suggest hybrid methods that are efficient, accurate and robust to noise. 1.