Results 1 - 10
of
318
A Survey of Mobility Models for Ad Hoc Network Research
- WIRELESS COMMUNICATIONS & MOBILE COMPUTING (WCMC): SPECIAL ISSUE ON MOBILE AD HOC NETWORKING: RESEARCH, TRENDS AND APPLICATIONS
, 2002
"... In the performance evaluation of a protocol for an ad hoc network, the protocol should be tested under realistic conditions including, but not limited to, a sensible transmission range, limited buffer space for the storage of messages, representative data traffic models, and realistic movements of t ..."
Abstract
-
Cited by 1179 (7 self)
- Add to MetaCart
In the performance evaluation of a protocol for an ad hoc network, the protocol should be tested under realistic conditions including, but not limited to, a sensible transmission range, limited buffer space for the storage of messages, representative data traffic models, and realistic movements of the mobile users (i.e., a mobility model). This paper is a survey of mobility models that are used in the simulations of ad hoc networks. We describe several mobility models that represent mobile nodes whose movements are independent of each other (i.e., entity mobility models) and several mobility models that represent mobile nodes whose movements are dependent on each other (i.e., group mobility models). The goal of this paper is to present a number of mobility models in order to offer researchers more informed choices when they are deciding upon a mobility model to use in their performance evaluations. Lastly, we present simulation results that illustrate the importance of choosing a mobility model in the simulation of an ad hoc network protocol. Specifically, we illustrate how the performance results of an ad hoc network protocol drastically change as a result of changing the mobility model simulated.
DSR: The Dynamic Source Routing Protocol for Multi-Hop Wireless Ad Hoc Networks
- In Ad Hoc Networking, edited by Charles E. Perkins, Chapter 5
, 2001
"... The Dynamic Source Routing protocol (DSR) is a simple and efficient routing protocol designed specifically for use in multi-hop wireless ad hoc networks of mobile nodes. DSR allows the network to be completely self-organizing and self-configuring, without the need for any existing network infrastruc ..."
Abstract
-
Cited by 743 (8 self)
- Add to MetaCart
The Dynamic Source Routing protocol (DSR) is a simple and efficient routing protocol designed specifically for use in multi-hop wireless ad hoc networks of mobile nodes. DSR allows the network to be completely self-organizing and self-configuring, without the need for any existing network infrastructure or administration. The protocol is composed of the two mechanisms of Route Discovery and Route Maintenance, which work together to allow nodes to discover and maintain source routes to arbitrary destinations in the ad hoc network. The use of source routing allows packet routing to be trivially loop-free, avoids the need for up-to-date routing information in the intermediate nodes through which packets are forwarded, and allows nodes forwarding or overhearing packets to cache the routing information in them for their own future use. All aspects of the protocol operate entirely on-demand, allowing the routing packet overhead of DSR to scale automatically to only that needed to react to changes in the routes currently in use. We have evaluated the operation of DSR through detailed simulation on a variety of movement and communication patterns, and through implementation and significant experimentation in a physical outdoor ad hoc networking testbed we have constructed in Pittsburgh, and have demonstrated the excellent performance of the protocol. In this chapter, we describe the design of DSR and provide a summary of some of our simulation and testbed implementation results for the protocol. 1
SEAD: Secure Efficient Distance Vector Routing for Mobile Wireless Ad Hoc Networks
, 2003
"... An ad hoc network is a collection of wireless computers (nodes), communicating among themselves over possibly multihop paths, without the help of any infrastructure such as base stations or access points. Although many previous ad hoc network routing protocols have been based in part on distance vec ..."
Abstract
-
Cited by 522 (8 self)
- Add to MetaCart
(Show Context)
An ad hoc network is a collection of wireless computers (nodes), communicating among themselves over possibly multihop paths, without the help of any infrastructure such as base stations or access points. Although many previous ad hoc network routing protocols have been based in part on distance vector approaches, they have generally assumed a trusted environment. In this paper, we design and evaluate the Secure Efficient Ad hoc Distance vector routing protocol (SEAD), a secure ad hoc network routing protocol based on the design of the Destination-Sequenced Distance-Vector routing protocol. In order to support use with nodes of limited CPU processing capability, and to guard against Denial-of-Service attacks in which an attacker attempts to cause other nodes to consume excess network bandwidth or processing time, we use efficient one-way hash functions and do not use asymmetric cryptographic operations in the protocol. SEAD performs well over the range of scenarios we tested, and is robust against multiple uncoordinated attackers creating incorrect routing state in any other node, even in spite of any active attackers or compromised nodes in the network.
A group mobility model for ad hoc wireless networks
, 1999
"... In this paper, we present a survey of various mobility models in both cellular networks and multi-hop networks. We show that group motion occurs frequently in ad hoc networks, and introduce a novel group mobility model- Reference Point Group Mobility (RPGM)- to represent the relationship among mobil ..."
Abstract
-
Cited by 441 (27 self)
- Add to MetaCart
(Show Context)
In this paper, we present a survey of various mobility models in both cellular networks and multi-hop networks. We show that group motion occurs frequently in ad hoc networks, and introduce a novel group mobility model- Reference Point Group Mobility (RPGM)- to represent the relationship among mobile hosts. RPGM can be readily applied to many existing applications. Moreover, by proper choice of parameters, RPGM can be used to model several mobility models which were previously proposed. One of the main themes of this paper is to investigate the impact of the mobility model on the performance of a specific network protocol or application. To this end, we have applied our RPGM model to two different network protocol scenarios, clustering and routing, and have evaluated network performance under different mobility patterns and for different protocol implementations. As expected, the results indicate that different mobility patterns affect the various protocols in different ways. In particular, the ranking of routing algorithms is influenced by the choice of mobility pattern. 1
On-demand Multipath Distance Vector Routing in Ad Hoc Networks
- in Proceedings of IEEE International Conference on Network Protocols (ICNP
, 2001
"... We develop an on-demand, multipath distance vector protocol for mobile ad hoc networks. Specifically, we propose multipath extensions to a well-studied single path routing protocol known as Ad hoc On-demand Distance Vector (AODV). The resulting protocol is referred to as Ad hoc Ondemand Multipath Di ..."
Abstract
-
Cited by 342 (3 self)
- Add to MetaCart
(Show Context)
We develop an on-demand, multipath distance vector protocol for mobile ad hoc networks. Specifically, we propose multipath extensions to a well-studied single path routing protocol known as Ad hoc On-demand Distance Vector (AODV). The resulting protocol is referred to as Ad hoc Ondemand Multipath Distance Vector (AOMDV). The protocol computes multiple loop-free and link-disjoint paths. Loopfreedom is guaranteed by using a notion of "advertised hopcount." Link-disjointness of multiple paths is achieved by using a particular property of flooding. Performance comparison of AOMDV with AODV using ns-2 simulations shows that AOMDV is able to achieve a remarkable improvement in the end-to-end delay --- often more than a factor of two, and is also able to reduce routing overheads by about 20%. 1
The Performance of Query Control Schemes for the Zone Routing Protocol
, 2001
"... In this paper, we study the performance of route query control mechanisms for the Zone Routing Protocol (ZRP) for ad hoc networks. ZRP proactively maintains routing information for a local neighborhood (routing zone), while reactively acquiring routes to destinations beyond the routing zone. This hy ..."
Abstract
-
Cited by 322 (17 self)
- Add to MetaCart
(Show Context)
In this paper, we study the performance of route query control mechanisms for the Zone Routing Protocol (ZRP) for ad hoc networks. ZRP proactively maintains routing information for a local neighborhood (routing zone), while reactively acquiring routes to destinations beyond the routing zone. This hybrid routing approach can be more efficient than traditional routing schemes. However, without proper query control techniques, the ZRP cannot provide the expected reduction in the control traffic.
Maximum Battery Life Routing to Support Ubiquitous Mobile Computing in Wireless Ad Hoc Networks
, 2001
"... Most ad hoc mobile devices today operate on batteries. Hence, power consumption becomes an important issue. To maximize the lifetime of ad hoc mobile networks, the power consumption rate of each node must be evenly distributed, and the overall transmission power for each connection request mus ..."
Abstract
-
Cited by 322 (0 self)
- Add to MetaCart
Most ad hoc mobile devices today operate on batteries. Hence, power consumption becomes an important issue. To maximize the lifetime of ad hoc mobile networks, the power consumption rate of each node must be evenly distributed, and the overall transmission power for each connection request must be minimized. These two objectives cannot be satisfied simultaneously by employing routing algorithms proposed in previous work. In this article we present a new power-aware routing protocol to satisfy these two constraints simultaneously; we also compare the performance of different types of power-related routing algorithms via simulation. Simulation results confirm the need to strike a balance in attaining service availability performance of the whole network vs. the lifetime of ad hoc mobile devices.
Scalable routing strategies for ad hoc wireless networks
- IEEE JSAC
, 1999
"... In this paper, we consider a large population of mobile stations that are interconnected by a multihop wireless network. The applications of this wireless infrastructure range from ad hoc networking (e.g., collaborative, distributed computing) to disaster recovery (e.g., fire, flood, earthquake), l ..."
Abstract
-
Cited by 259 (15 self)
- Add to MetaCart
In this paper, we consider a large population of mobile stations that are interconnected by a multihop wireless network. The applications of this wireless infrastructure range from ad hoc networking (e.g., collaborative, distributed computing) to disaster recovery (e.g., fire, flood, earthquake), law enforcement (e.g., crowd control, search-and-rescue), and military (automated battlefield). Key characteristics of this system are the large number of users, their mobility, and the need to operate without the support of a fixed (wired or wireless) infrastructure. The last feature sets this system apart from existing cellular systems and in fact makes its design much more challenging. In this environment, we investigate routing strategies that scale well to large populations and can handle mobility. In addition, we address the need to support multimedia communications, with low latency requirements for interactive traffic and quality-of-service (QoS) support for real-time streams (voice/video). In the wireless routing area, several schemes have already been proposed and implemented (e.g., hierarchical routing, on-demand routing, etc.). We introduce two new schemes—fisheye state routing (FSR) and hierarchical state routing (HSR)—which offer some competitive advantages over the existing schemes. We compare the performance of existing and proposed schemes via simulation.
Determining the Optimal Configuration for the Zone Routing Protocol
- IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS
, 1999
"... The zone routing protocol (ZRP) is a hybrid routing protocol that proactively maintains routes within a local region of the network (which we refer to as the routing zone). Knowledge of this routing zone topology is leveraged by the ZRP to improve the efficiency of a reactive route query/reply mech ..."
Abstract
-
Cited by 215 (10 self)
- Add to MetaCart
(Show Context)
The zone routing protocol (ZRP) is a hybrid routing protocol that proactively maintains routes within a local region of the network (which we refer to as the routing zone). Knowledge of this routing zone topology is leveraged by the ZRP to improve the efficiency of a reactive route query/reply mechanism. The ZRP can be configured for a particular network through adjustment of a single parameter, the routing zone radius. In this paper, we address the issue of configuring the ZRP to provide the best performance for a particular network at any time. Previous work has demonstrated that an optimally configured ZRP operates at least as efficiently as traditional reactive flood-search or proactive distance vector/link state routing protocols (and in many cases, much more efficiently). Adaptation of the ZRP to changing network conditions requires both an understanding of how the ZRP reacts to changes in network behavior and a mechanism to allow individual nodes to identify these changes given only limited knowledge of the network behavior. In the first half of this paper, we demonstrate the effects of relative node velocity, node density, network span, and user data activity on the performance of the ZRP. We then introduce two different schemes (“min searching” and “traffic adaptive”) that allow individual nodes to identify and appropriately react to changes in network configuration, based only on information derived from the amount of received ZRP traffic. Through test-bed simulation, we demonstrate that these radius estimation techniques can allow the ZRP to operate within 2 % of the control traffic resulting from perfect radius estimation.
