Wireless Sensor Networks have been proposed for a multitude of location-dependent applications. For such systems, the cost and limitations of hardware on sensing nodes prevent the use of range-based localization schemes that depend on absolute point-to-point distance estimates. Because coarse accuracy is sufficient for most sensor network applications, solutions in range-free localization are being pursued as a cost-effective alternative to more expensive range-based approaches. In this paper, we present APIT, a novel localization algorithm that is range-free. We show that our APIT scheme performs best when an irregular radio pattern and random node placement are considered, and low communication overhead is desired. We compare our work via extensive simulation, with three state-of-the-art range-free localization schemes to identify the preferable system configurations of each. In addition, we study the effect of location error on routing and tracking performance. We show that routing performance and tracking accuracy are not significantly affected by localization error when the error is less than 0.4 times the communication radio radius. 1.

Recent advances in wireless sensor networks have led to many new protocols specifically designed for sensor networks where energy awareness is an essential consideration. Most of the attention, however, has been given to the routing protocols since they might differ depending on the application and network architecture. This paper surveys recent routing protocols for sensor networks and presents a classification for the various approaches pursued. The three main categories explored in this paper are data-centric, hierarchical and location-based. Each routing protocol is described and discussed under the appropriate category. Moreover, protocols using contemporary methodologies such as network flow and QoS modeling are also discussed. The paper concludes with open research issues. 1.

Wireless Sensor Networks (WSNs) consist of small nodes with sensing, computation, and wireless communications capabilities. Many routing, power management, and data dissemination protocols have been specifically designed for WSNs where energy awareness is an essential design issue. The focus, however, has been given to the routing protocols which might differ depending on the application and network architecture. In this paper, we present a survey of the state-of-the-art routing techniques in WSNs. We first outline the design challenges for routing protocols in WSNs followed by a comprehensive survey of different routing techniques. Overall, the routing techniques are classified into three categories based on the underlying network structure: flat, hierarchical, and location-based routing. Furthermore, these protocols can be classified into multipath-based, query-based, negotiation-based, QoS-based, and coherent-based depending on the protocol operation. We study the design tradeoffs between energy and communication overhead savings in every routing paradigm. We also highlight the advantages and performance issues of each routing technique. The paper concludes with possible future research areas. 1

For many sensor network applications such as military surveillance, it is necessary to provide full sensing coverage to a security-sensitive area while at the same time minimize energy consumption and extend system life by leveraging the redundant deployment of sensor nodes. It is also preferable for the sensor network to provide differentiated surveillance service for various target areas with different degrees of security requirements. In this paper, we propose a differentiated surveillance service for sensor networks based on an adaptable energy-efficient sensing coverage protocol. In the protocol, each node is able to dynamically decide a schedule for itself to guarantee a certain degree of coverage (DOC) with average energy consumption inversely proportional to the node density. Several optimizations and extensions are proposed to provide even better performance. Simulation shows that our protocol accomplishes differentiated surveillance with low energy consumption. It outperforms other state-of-art schemes by as much as 50% reduction in energy consumption and as much as 130% increase in the half-life of the network. Keywords: Sensor Networks, Sensing Coverage, Energy Conservation, Differentiated Surveillance 1.

In this paper, we investigate the impact of radio irregularity on the communication performance in wireless sensor networks. Radio irregularity is a common phenomenon which arises from multiple factors, such as variance in RF sending power and different path losses depending on the direction of propagation. From our experiments, we discover that the variance in received signal strength is largely random; however, it exhibits a continuous change with incremental changes in direction. With empirical data obtained from the MICA2 platform, we establish a radio model for simulation, called the Radio Irregularity Model (RIM). This model is the first to bridge the discrepancy between spherical radio models used by simulators and the physical reality of radio signals. With this model, we are able to analyze the impact of radio irregularity on some of the well-known MAC and routing protocols. Our results show that radio irregularity has a significant impact on routing protocols, but a relatively small impact on MAC protocols. Finally, we propose six solutions to deal with radio irregularity. We evaluate two of them in detail. The results obtained from both the simulation and a running testbed demonstrate that our solutions greatly improve communication performance in the presence of radio irregularity.

This article describes one of the major efforts in the sensor network community to build an integrated sensor network system for surveillance missions. The focus of this effort is to acquire and verify information about enemy capabilities and positions of hostile targets. Such missions often involve a high element of risk for human personnel and require a high degree of stealthiness. Hence, the ability to deploy unmanned surveillance missions, by using wireless sensor networks, is of great practical importance for the military. Because of the energy constraints of sensor devices, such systems necessitate an energy-aware design to ensure the longevity of surveillance missions. Solutions proposed recently for this type of system show promising results through simulations. However, the simplified assumptions they make about the system in the simulator often do not hold well in practice, and energy consumption is narrowly accounted for within a single protocol. In this article, we describe the design and implementation of a complete running system, called VigilNet, for energyefficient surveillance. The VigilNet allows a group of cooperating sensor devices to detect and track the positions of moving vehicles in an energy-efficient and stealthy manner. We evaluate VigilNet middleware components and integrated system extensively on a network of 70 MICA2 motes. Our results show that our surveillance strategy is adaptable and achieves a significant extension of

Abstract. This paper presents the Real-Time Event Detection Services middleware which is a component of the Data Service Middleware (DSWare). DSWare is a data-centric and group-based service for sensor networks. The real-time event service includes unreliability of individual sensor reports, correlation among different sensor observations, and inherent real-time characteristics of events. The event service supports confidence functions which are designed based on data semantics, including relative importance of sub-events and historical patterns. When the failure rate is high, the event service enables partial detection of critical events to be reported in a timely manner. It can also be applied to differentiate between the occurrences of events and false alarms. 1 Introduction Sensor networks are large-scale wireless networks that consist of numerous sen-sor and actuator nodes used to monitor and interact with physical environments [11][14]. From one perspective sensor networks are similar to distributeddatabase systems. They store environmental data on distributed nodes and respond to aperiodic and long-lived periodic queries [7][15][20]. Data interest canbe pre-registered to the sensor network so that the corresponding data is collected and transmitted only when needed. These specified interests are similarto views in traditional databases because they filter the data according to the application's data semantics and shield the overwhelming volume of raw datafrom applications [8][26]. Sensor networks also have inherent real-time properties. The environmentthat sensor networks interact with is usually dynamic and volatile. The sensor data usually has an absolute validity interval of time after which the data valuesmay not be consistent with the real environment. Transmitting and processing "stale " data wastes communication resources and can result in wrong decisionsbased on the reported out-of-date data. Besides data freshness, often the data must also be sent to the destination by a deadline. To date, not much researchhas been performed on real-time data services in sensor networks.

In this paper, we investigate the impact of radio irregularity on wireless sensor networks. Radio irregularity is a common phenomenon which arises from multiple factors, such as variance in RF sending power and different path losses depending on the direction of propagation. From our experiments, we discover that the variance in received signal strength is largely random; however, it exhibits a continuous change with incremental changes in direction. With empirical data obtained from the MICA2 and MICAZ platforms, we establish a radio model for simulation, called the Radio Irregularity Model (RIM). This model is the first to bridge the discrepancy between spherical radio models used by simulators and the physical reality of radio signals. With this model, we investigate the impact of radio irregularity on several upper layer protocols, including MAC, routing, localization and topology control. Our results show that radio irregularity has a relatively larger impact on the routing layer than the MAC layer. It also shows that radio irregularity leads to larger localization errors and makes it harder to maintain communication connectivity in topology control. To deal with these issues, we present eight solutions to deal with radio irregularity. We evaluate three of them in detail. The results obtained from both the simulations and a running testbed demonstrate that our solutions greatly improve system performance in the presence of radio irregularity.

Abstract—In this paper, we present a novel packet delivery mechanism called Multi-Path and Multi-SPEED Routing Protocol (MMSPEED) for probabilistic QoS guarantee in wireless sensor networks. The QoS provisioning is performed in two quality domains, namely, timeliness and reliability. Multiple QoS levels are provided in the timeliness domain by guaranteeing multiple packet delivery speed options. In the reliability domain, various reliability requirements are supported by probabilistic multipath forwarding. These mechanisms for QoS provisioning are realized in a localized way without global network information by employing localized geographic packet forwarding augmented with dynamic compensation, which compensates for local decision inaccuracies as a packet travels towards its destination. This way, MMSPEED can guarantee end-to-end requirements in a localized way, which is desirable for scalability and adaptability to large scale dynamic sensor networks. Simulation results show that MMSPEED provides QoS differentiation in both reliability and timeliness domains and, as a result, significantly improves the effective capacity of a sensor network in terms of number of flows that meet both reliability and timeliness requirements up to 50 percent (12 flows versus 18 flows).

Wireless Sensor Networks (WSNs) are being designed to solve a gamut of interesting real-world problems. Limitations on available energy and bandwidth, message loss, high rates of node failure, and communication restrictions pose challenging requirements for these systems. Beyond these inherent limitations, both the possibility of node mobility and energy conserving protocols that power down nodes introduce additional complexity to routing protocols that depend on up to date routing or neighborhood tables. Such state-based protocols suffer excessive delay or message loss, as system dynamics require expensive upkeep of these tables. Utilizing characteristics of high node density and location awareness, we introduce IGF, a location-aware routing protocol that is robust and works without knowledge of the existence of neighboring nodes (state-free). We compare our work against established routing protocols to demonstrate the efficacy of our solution when nodes are mobile or periodically sleep to conserve energy. We show that IGF far outperforms these protocols, in some cases delivering close to 100% of the packets transmitted while alternate solutions fail to even find a path between a source and destination. Specifically, we show that our protocol demonstrates a vast improvement over prior work using metrics of delivery ratio, control overhead, and end-to-end delay.