Tools
Sorted by:
Try your query at:
 |
 |
 |
 |
 |
 |
Results 1 - 10
of
56,133
Cavitation in high-density polyethylene
"... The density of cavities developing in both unfilled and filled polymers decreases from core to skin and is substantially affected by macroscopic stresses. In semi-crystalline polymers, cavitation is of growing interest for both fundamental and applied research. Indeed, it is well known that cavita-t ..."
Abstract
- Add to MetaCart
methodology to quantify the density of voids developing in neat and nanocomposite calcium carbonate (CaCO3/-filled high-density polyethylene (HDPE) in different states of defor-mation, obtained under tension. Particularly, we focus on the void distribution from the core to the skin of tensile specimens. We
and high-density polyethylene
"... Received in revised form 15.07.2006; accepted in final form 30.10.2006 ..."
crystallized polypropylene and high-density polyethylene
, 2012
"... Cavitation during tensile deformation of isothermally ..."
Properties of Recycled High Density Polyethylene and Coffee Dregs Composites
"... Abstract: Composites of recycled high density polyethylene (HDPE-R) and coffee dregs (COFD) were elaborated. ..."
Abstract
- Add to MetaCart
Abstract: Composites of recycled high density polyethylene (HDPE-R) and coffee dregs (COFD) were elaborated.
The Enhancement of the Mechanical Properties of a High-Density Polyethylene
, 1998
"... ABSTRACT: This paper describes the process optimization in injection molding of high-density polyethylene (HDPE). Both conventional injection molding and shear controlled orientation (SCORIM) were employed in processing. The process optimization was based on design of experiments and complemented wi ..."
Abstract
- Add to MetaCart
ABSTRACT: This paper describes the process optimization in injection molding of high-density polyethylene (HDPE). Both conventional injection molding and shear controlled orientation (SCORIM) were employed in processing. The process optimization was based on design of experiments and complemented
High-Density Polyethylene Reinforced With Submicron Titania
"... Submicron titania particles were prepared by means of two different synthetic procedures in order to obtain different particle size (diameter ranging from 20 to 350 nm), shapes, and morphologies (amorphous or crystalline). Titania particles were surface modified with octadecylsilane in order to impr ..."
Abstract
-
Cited by 2 (0 self)
- Add to MetaCart
to improve their compati-bility with respect to polymeric matrices. High-density polyethylene (HDPE)–titania composites were prepared by melt blending by using an internal mixer. The obtained composites were mechanically characterized in quasi static and creep tensile conditions. The pres-ence of submicron
Toughness of high-density polyethylene with hard filler particles
"... The impact toughness of high-density polyethylene modified with calcium carbonate particles was in-vestigated for different processing conditions. The increase in toughness differed not only between com-pression and injection moulded samples, but also between samples with different position in an in ..."
Abstract
-
Cited by 1 (0 self)
- Add to MetaCart
The impact toughness of high-density polyethylene modified with calcium carbonate particles was in-vestigated for different processing conditions. The increase in toughness differed not only between com-pression and injection moulded samples, but also between samples with different position
Synergistic effect of industrial waste in High Density Polyethylene
"... This article emphasizes the effect of industrial waste such as marble sludge (MS) on high density polyethylene (HDPE) composites. Marble Sludge (MS) was first dried, ground and passed through 63, 125 and 250 µm sieves to obtain desiring particle sizes. Chemical composition of MS powder was determine ..."
Abstract
- Add to MetaCart
This article emphasizes the effect of industrial waste such as marble sludge (MS) on high density polyethylene (HDPE) composites. Marble Sludge (MS) was first dried, ground and passed through 63, 125 and 250 µm sieves to obtain desiring particle sizes. Chemical composition of MS powder
Toughness of high-density polyethylene in shear fracture
, 2007
"... Abstract This paper evaluates the validity of a new test methodology for measuring shear fracture toughness (mode II) of high density polyethylene (HDPE). The methodology adopts Iosipescu test for the shear loading, and determines the toughness based on the essential work of fracture (EWF) concept. ..."
Abstract
- Add to MetaCart
Abstract This paper evaluates the validity of a new test methodology for measuring shear fracture toughness (mode II) of high density polyethylene (HDPE). The methodology adopts Iosipescu test for the shear loading, and determines the toughness based on the essential work of fracture (EWF) concept
Results 1 - 10
of
56,133
