Smith, S. J.; Hebbar, K.; Nau, D.; and Minis, I. 1997. Integrating electrical and mechanical design and process planning. In Martti Mantyla, Susan Finger and Tetsuo Tomiyama (ed.), Knowledge Intensive CAD, Volume 2, pp. 269-288.  Home/Search   Document Details and Download   Summary   Related Articles   Check

.... Temporal Ordering . However, other representational areas such as Process Intent have not yet been addressed. The initial PSL ontology was developed using a single scenario, the EDAPS (Electromechanical Design and Planning System) scenario developed by Steve Smith at the University of Maryland [15]. The concepts introduced in that scenario were defined and modeled within PSL and later extended as other scenarios were explored. The PSL ontology was then further expanded to incorporate the concepts introduced in various manufacturing software applications when PSL was used to exchange process ....

Smith, S.J.J., at al., Integrating Electrical and Mechanical Design and Process Planning, Proceedings of the IFIP Knowledge Intensive CAD Workshop, 1996, Carnegie-Mellon University (CMU).

....such as Process Intent have not yet been addressed. The development of PSL has proceeded on an as needed basis. The initial PSL ontology was developed using a single scenario, the EDAPS (Electromechanical Design and Planning System) scenario developed by Steve Smith at the University of Maryland [15]. The concepts introduced in that scenario were defined and modeled within PSL and later extended as other scenarios were explored. The PSL ontology was then further expanded to incorporate the concepts introduced in various manufacturing software applications when PSL was used to exchange process ....

Smith, S.J.J., at al., Integrating Electrical and Mechanical Design and Process Planning, Proceedings of the IFIP Knowledge Intensive CAD Workshop, 1996, Carnegie-Mellon University (CMU).

....control strategies (Tsuneto et al. 1996, 1997) A domain independent HTN planner is available at http: www.cs.umd.edu projects plus umcp manual for experimental use, and domain specific HTN planners are being developed for several practical applications (Aarup et at. 1994; Hebbar et al. 1996; Smith et al. 1997; Smith et al. 1998; Wilkins Desimone 1994) Two Applications of HTN Planning Contract Bridge Although computer programs have done very well in games such as chess, checkers, and Othello (Schaeffer 1993; Korf 1994) human experts still outperform computers in the game of bridge. One reason ....

Smith, S. J.; Hebbar, K.; Nau, D.; and Minis, I. 1997. Integrating electrical and mechanical design and process planning. In Martti Mantyla, Susan Finger and Tetsuo Tomiyama (ed.), Knowledge Intensive CAD, Volume 2, pp. 269-288.

.... but from an optimization perspective these two attributes are at odds (generally, a designer wants to minimize cost while maximizing quality) Prior Related Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and ....

.... perspective these two attributes are at odds (generally, a designer wants to minimize cost while maximizing quality) Prior Related Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and provided feedback about ....

Smith, S. J., Hebbar, K., Nau, D., and Minis, I. 1997. Integrating Electrical and Mechanical Design and Process Planning. In Knowledge Intensive CAD, Volume 2, 269288. Chapman and Hall, London.

....concurrent engineering system for PCBs that represents process knowledge as constraints and provides manufacturability feedback on the design. 3. 2 Our Prior Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and ....

....system for PCBs that represents process knowledge as constraints and provides manufacturability feedback on the design. 3. 2 Our Prior Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and provided feedback ....

Smith, S. J., Hebbar, K., Nau, D., and Minis, I. (1997). Integrating Electrical and Mechanical Design and Process Planning. In Knowledge Intensive CAD, Volume 2, 269-288. Chapman and Hall, London.

....concurrent engineering system for PCBs that represents process knowledge as constraints and provides manufacturability feedback on the design. 3. 2 Our Prior Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and ....

....system for PCBs that represents process knowledge as constraints and provides manufacturability feedback on the design. 3. 2 Our Prior Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and provided feedback ....

Smith, S. J., Hebbar, K., Nau, D., and Minis, I. (1997). Integrating Electrical and Mechanical Design and Process Planning. In Knowledge Intensive CAD, Volume 2, 269-288. Chapman and Hall, London.

....concurrent engineering system for PCBs that represents process knowledge as constraints and provides manufacturability feedback on the design. 3. 2 Our Prior Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and ....

....system for PCBs that represents process knowledge as constraints and provides manufacturability feedback on the design. 3. 2 Our Prior Work The IPPD tool described in this paper grew out of the merger of two previous projects at the University of Maryland: the EDAPS project (Smith et al. 1997, Smith et al. 1997) and the EXTRA project (Karne, et al. 1998) EDAPS (Electro Mechanical Design And Planning System) was an integrated design and process planning system for microwave modules, which incorporated interfaces to electronic and commercial CAD tools, generated process plans, and provided feedback ....

Smith, S. J., Hebbar, K., Nau, D., and Minis, I. 1997. Integrating Electrical and Mechanical Design and Process Planning. In Knowledge Intensive CAD, Volume 2, 269-288. Chapman and Hall, London.

Online articles have much greater impact   More about CiteSeer.IST   Add search form to your site   Submit documents   Feedback  

CiteSeer.IST - Copyright Penn State and NEC