Amirtharajah, R.; Chandrakasan, A.P. Self-powered signal processing using vibration-based power generation. IEEE Journal of SolidState Circuits, May 1998, vol.33, (no.5):687-95. Home/Search Document Details and Download
Summary Related Articles Check |
This paper is cited in the following contexts:
Challenges and Opportunities in Broadband and.. - Rabaey.. (2000) (2 citations) (Correct)
....networks are perfect for data acquisition and environment control applications. To achieve large, dense networks, PicoNodes must be inexpensive, lightweight. To avoid periodic battery replacement for hundreds of nodes, they must exhibit extremely low energy consumption to enable energy scavenging [19]. In designing the PicoRadio network processor, we employ the platform based design approach to devise an architecture that is optimized for size, cost, and most importantly, energy. In this section, we present the design of the PicoRadio network processing architecture as a case study to ....
R. Amirtharajah, A. P. Chandrakasan, Self-Powered Signal Processing Using Vibration-based Power Generation. IEEE Journal of Solid State Circuits, vol. 33, no. 5, pp. 687-95, May 1998.
Switched-Capacitor Dc-Dc Converters For Low-Power On-Chip.. - Dragan Maksimovic And (Correct)
....is a need to generate various DC voltage levels from a given external DC supply VDD . Such applications include EEPROM and Flash memories, auxiliary supplies for analog portions of low voltage, mixed signal VLSI, and implementation of emerging adaptive voltage scaling power management techniques [10] in energy limited systems. The output power in these applications is often in the milliwatt range, but converter efficiency and area taken by the converter can be very important. The purpose of this paper is to introduce design objectives and constraints in the relatively new and expanding power ....
R. Amirtharajah and A. P. Chandrakasan, "Self-Powered Signal processing Using Vibration-Based Power Generation," IEEE journal of SolidState Circuits, Vol. 33, No. 5, May 1998, pp. 687-695.
A 180-mV Subthreshold FFT Processor Using a Minimum Energy.. - Wang, Chandrakasan (2005) Self-citation (Chandrakasan) (Correct)
No context found.
R. Amirtharajah and A. Chandrakasan, "Self-powered signal processing using vibration-based power generation," IEEE J. Solid-State Circuits, vol. 33, no. 5, pp. 687--695, May 1998.
Vibration-to-Electric Energy Conversion - Scott Meninger Jose (2001) (8 citations) Self-citation (Amirtharajah Chandrakasan) (Correct)
No context found.
R. Amirtharajah and A. P. Chandrakasan, "Self-powered signal processing using vibration-based power generation," IEEE J. Solid-State Circuits, vol. 33, May 1998.
Processors for Mobile Applications - Koushanfar, Prabhu, Potkonjak.. (2000) (1 citation) (Correct)
No context found.
Amirtharajah, R.; Chandrakasan, A.P. Self-powered signal processing using vibration-based power generation. IEEE Journal of SolidState Circuits, May 1998, vol.33, (no.5):687-95.
A 1.9GHz RF Transmit Beacon using - Environmentally Scavenged Energy (Correct)
No context found.
Amirtharajah, R., Chandrakasan, A.P., "Self-Powered Signal Processing Using Vibration-Based Power Generation," IEEE JSSC, Vol. 33, No. 5, p. 687-695.
Reconfigurable Platform Design For Wireless Protocol Processors - Tim Tuan Suet-Fei (2001) (Correct)
No context found.
R. Amirtharajah, A. P. Chandrakasan, "Self-Powered Signal Processing Using Vibration-based Power Generation", IEEE Journal of Solid State Circuits, vol. 33, no. 5, pp. 687-95, 1998.
Reconfigurable Platform Design For Wireless Protocol Processors - Tuan, Li, Rabaey (Correct)
No context found.
R. Amirtharajah, A. P. Chandrakasan, "Self-Powered Signal Processing Using Vibration-based Power Generation", IEEE Journal of Solid State Circuits, vol. 33, no. 5, pp. 687-95, 1998.
A study of low level vibrations as a power source for.. - University Of California (2003) (Correct)
No context found.
R. Amirtharajah, A.P. Chandrakasan, Self-powered signal processing using vibration-based power generation, IEEE Journal of Solid-State Circuits 33 (1998) 687 -- 695.
A 1.9GHz RF Transmit Beacon using - Environmentally Scavenged Energy (2003) (Correct)
No context found.
Amirtharajah, R., Chandrakasan, A.P., "Self-Powered Signal Processing Using Vibration-Based Power Generation," IEEE JSSC, Vol. 33, No. 5, p. 687-695.
Online articles have much greater impact More about CiteSeer.IST Add search form to your site Submit documents Feedback
CiteSeer.IST - Copyright Penn State and NEC