| ITU-T Recommendation G.707, "Network Node Interface for the Synchronous Digital Hierarchy (SDH)," March 1996. |
....Layers above the AAL in the user plane are service dependent. Examples of functions provided by this layer include inter carrier service specific functions. Figure 2.2 Relation of a B ICI to the NNI 2. 3 Network Node Interface (R) 1 B ICI specification shall be based on the CCITT defined [1][2] 3] Network Node Interface (NNI) Figure 2.2 illustrates the relation between a B ICI and the NNI. The NNI specification includes Synchronous Optical netwprk (SONET) Synchronous Digital Hierarchy (SDH) physical layer and the ATM layer. The B ICI specification includes SONET and DS3 physical ....
....SAR sender shall support the transfer of a maximum of 1023 CPCS PDUs in transit concurrently. 11.2.2.2. 2 SAR Receiver Procedures Receiving a SAR PDU (R) 166 Upon receipt of a SAR PDU, the SAR receiver shall check that: o the SAR PDU CRC is valid; and o the value in the MID field is in the range [1,1023] 23 . If either of these checks fails, the SAR PDU shall be discarded. If the SAR PDU passes both checks, the SAR receiver shall forward the SAR PDU to the Receiver State Machine (RSM) associated with the MID value contained in the SAR PDU header. In this case, the SAR receiver shall implement ....
[Article contains additional citation context not shown here]
CCITT Recommendation, G.708: Network Node Interface for the Synchronous Digital Hierarchy, June 1992.
....SONET ATM ATM ATM BISDN B ICI NNI BISDN Inter Carrier Interface Network Node Interface Inter Carrier Service Specific Functions (e.g. AAL, PHY (SONET SDH) Figure 2.2. Relation of a B ICI to the NNI 2. 3 Network Node Interface (R) 1 B ICI specification shall be based on the CCITT defined [1] [2] 3] Network Node Interface (NNI) Figure 2.2 illustrates the relation between a B ICI and the NNI. The NNI specification includes Synchronous Optical Network (SONET) Synchronous Digital Hierarchy (SDH) physical layer, 1993 The ATM Forum All Rights Reserved B ICI Specification Version ....
....sender shall support the transfer of a maximum of 1023 CPCS PDUs in transit concurrently. 11.2.2.2. 2 SAR Receiver Procedures Receiving a SAR PDU (R) 166 Upon receipt of a SAR PDU, the SAR receiver shall check that: # the SAR PDU CRC is valid; and # the value in the MID field is in the range [1,1023] 23 . If either of these checks fails, the SAR PDU shall be discarded. If the SAR PDU passes both checks, the SAR receiver shall forward the SAR PDU to the Receiver State Machine (RSM) associated with the MID value contained in the SAR PDU header. In this case, the SAR receiver shall implement ....
[Article contains additional citation context not shown here]
CCITT Recommendation, G.708: Network Node Interface for the Synchronous Digital Hierarchy, June, 1992.
....At present, this applies to these values of the ifType variable in the Internet standard MIB: sonet (39) sonetPath (50) sonetVT (51) The definitions contained in the MIB are based on the SONET SDH specifications in ANSI T1.105 1991 [44] and T1.106 1988 [45] and CCITT ITU T G.707 [46] G. 708 [47], G.709 [48] and G.783 [49] Note that G.708 and G.709 are now merged in one ITU T Recommendation G.707) 3.3 ITU T MIBs TMN OSI is primarely based on CMIP CMIS protocol stack and represents a mature technology in terms of standards, object class definitions, and commercial products. In B ISDN, ....
....728 kbit s and 139 264 kbit s [63] It is envisaged that these frame structures could, unless otherwise indicated, be used for the transport of other signals (e.g. ATM cells) The following Recommendations at the time of publication, the editions indicated were valid: ITU T Recommendation G. 708 [47], Network node interface for the synchronous digital hierarchy, ITU T Recommendation G.709 [48] Synchronous multiplexing structure, ITU T Recommendation G.804 [74] ATM cell mapping into Plesiochronous Digital Hierarchy (PDH) Recently, the MIBs G.708 and G.709 are merged in a new ....
CCITT Recommendation G.708, "Network Node Interface for the Synchronous Digital Hierarchy", MIB Extensions for ATM 36
No context found.
ITU-T Recommendation G.707, "Network Node Interface for the Synchronous Digital Hierarchy (SDH)," March 1996.
No context found.
CCITT Recommendation G.708, "Network Node Interface for the Synchronous Digital Hierarchy", June 1992.
No context found.
ITU-T Recommendation G.707 "Network Node Interface for the Synchronous Digital Hierarchy" 1996
No context found.
CCITT Recommendation G.708, "Network Node Interface for the Synchronous Digital Hierarchy", June 1992.
No context found.
CCITT Recommendation G.708: Network Node Interface for Synchronous Digital Hierarchy (1990).
No context found.
CCITT Recommendation G.708: Network Node Interface for Synchronous Digital Hierarchy (1990).
No context found.
CCITT Recommendation G.708: Network Node Interface for Synchronous Digital Hierarchy (1990).
No context found.
CCITT Recommendation G.708: Network Node Interface for Synchronous Digital Hierarchy, 1990.
No context found.
CCITT Recommendation G.708: Network Node Interface for Synchronous Digital Hierarchy (1990).
No context found.
CCITT Recommendation G.708, "Network Node Interface for the Synchronous Digital Hierarchy", June 1992.
Online articles have much greater impact More about CiteSeer.IST Add search form to your site Submit documents Feedback
CiteSeer.IST - Copyright Penn State and NEC