| Dipert, B. and Levy, M. 1994. Designing with Flash Memory. |
....place. The system must define a policy for selecting the next segment for reclamation. One obvious discrimination metric is segment utilization: picking the next segment by finding the one with the lowest utilization (i.e. the highest amount of memory that is reusable) MFFS uses this approach [4]. More complicated metrics are possible; for example, eNVy considers both utilization and locality when cleaning flash memory [25] The second aspect to erasure is performance. The SunDisk sdp5 flash disk couples erasure with writes, achieving a write bandwidth of 75 Kbytes s. The time to erase ....
Brian Dipert and Markus Levy. Designing with Flash Memory. Annabooks, 1993.
....place. The system must define a policy for selecting the next segment for reclamation. One obvious discrimination metric is segment utilization: picking the next segment by finding the one with the lowest utilization (i.e. the highest amount of memory that is reusable) MFFS uses this approach [4]. More complicated metrics are possible; for example, eNVy considers both utilization and locality when cleaning flash memory [24] The second aspect to erasure is performance. The SunDisk SDP flash disks couple erasure with writes, achieving a write bandwidth of 75 Kbytes s. The time to erase ....
Brian Dipert and Markus Levy. Designing with Flash Memory. Annabooks, 1993.
....place. The system must define a policy for selecting the next segment for reclamation. One obvious discrimination metric is segment utilization: picking the next segment by finding the one with the lowest utilization (i.e. the highest amount of memory that is reusable) MFFS uses this approach [4]. More complicated metrics are possible; for example, eNVy considers both utilization and locality when cleaning flash memory [24] The second aspect to erasure is performance. The SunDisk sdp flash disks couple erasure with writes, achieving a write bandwidth of 75 Kbytes s. The time to erase and ....
Brian Dipert and Markus Levy. Designing with Flash Memory. Annabooks, 1993.
....used in consumer electronics, embedded systems, and mobile computers. Applications are digital cameras, voice recorders, set top boxes, pagers, cellular phones, notebooks, hand held computing devices, Personal Digital Assistants (PDAs) 9] etc. Flash memory has special hardware characteristics [7,12,13,18] that impose challenges on the design of storage systems. Flash memory is partitioned into segments 1 and the segment sizes are defined by hardware This work was partially supported by the National Science Council of the Republic of China under grant no. NSC88 2213 E 001 016. manufactures. ....
....system performance, and power conservation. To maximize the lifetime of flash memory and avoid wearing out some segments to affect the usefulness of entire flash memory, write and erase operations must be balanced over the whole flash memory. The operation is called wearleveling or even wearing [7]. Since flash segment sizes are large, storage systems generally divide flash segments into smaller read write blocks. Updating data in place is not efficient since all data in the segment to be updated must first be copied out and then updated. After the segment has been erased, all data with ....
B. Dipert and M. Levy, Designing with Flash Memory, Annabooks, 1993.
No context found.
Dipert, B. and Levy, M. 1994. Designing with Flash Memory.
No context found.
Dipert, B. and Levy, M., Designing with Flash Memory, Annabooks, 1993.
No context found.
B. Dipert and M. Levy, Designing with Flash Memory, Annabooks, 1993.
Online articles have much greater impact More about CiteSeer.IST Add search form to your site Submit documents Feedback
CiteSeer.IST - Copyright Penn State and NEC